Fast Mover 2K Pu Plastic Repair Rigid Cartridge - White - 50ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Fast Mover 2K PU Plastic Repair Rigid Cartridge (FMT6340) is designed for automotive technicians and DIY enthusiasts requiring a high-strength, structural bond for plastic repairs. Its primary benefit is a fast-curing, cold-weld reaction that provides a durable, semi-rigid finish, though users should note that the 50ml format requires a compatible dispensing gun for precise application.
All features
| Colour | White |
|---|---|
| Model Part Number | FMT6340 |
| Brand | Fast Mover |
Extended Product Information
FAQs
Is this adhesive suitable for flexible plastics?
This product is specifically designed for rigid plastic repairs; it may be too stiff for highly flexible bumper sections.
Can I paint over the repair?
Yes, once the adhesive is fully cured, it can be sanded and painted to match the surrounding finish.
Do I need a special gun for this cartridge?
Yes, it requires a standard 50ml dual-component dispensing gun to ensure the two parts are mixed in the correct ratio.
How long does it take to cure?
The product features a fast-curing formula, but exact times vary by ambient temperature. It is best to wait for a full cure before sanding.
Can this be used for bonding metal to plastic?
It is optimized for plastic bonding; for metal-to-plastic applications, ensure the metal is roughened significantly for mechanical lock.
Troubleshooting
Adhesive not curing properly
Ensure the storage temperature is correct and verify that the dispensing gun is applying both components evenly.
Difficulty dispensing product
Check if the static mixer nozzle is blocked; replace with a new nozzle if the material has hardened inside.
Weak bond strength
Verify that the plastic surface was properly cleaned and abraded (scuffed) to promote mechanical adhesion.
Pros and Cons
Pros
- High-strength chemical bond
- Rapid curing time for efficiency
- Professional-grade structural repair
- Precise cartridge application
- Excellent for rigid plastic substrates
Cons
- Requires a compatible dispensing gun
- 50ml size may be insufficient for large-scale projects
- Limited work time once mixed
- Requires proper surface preparation
Setup, Compatibility & Care
To set up the FMT6340, insert the cartridge into a standard 50ml dual-component dispensing gun. Remove the cap, attach the static mixing nozzle, and discard the first few centimeters of product to ensure a perfect mix ratio. Compatibility includes most rigid automotive plastics. Store the cartridge in a cool, dry place with the cap secured when not in use to prevent premature curing. Clean excess material from the nozzle or surface immediately after application before it hardens.