Simply Xtreme Removable Thread Locker - Blue
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Simply Xtreme Removable Thread Locker (Blue) to secure threaded fasteners against loosening. The primary benefit is a strong, reliable bond that resists shock and vibration, preventing component failure. However, it's crucial to apply the thread locker correctly and allow sufficient curing time for optimal performance.
All features
| Colour | Blue |
|---|---|
| Model Part Number | XRTL1 |
| Brand | Simply |
Extended Product Information
FAQs
What is the shelf life of Simply Xtreme Removable Thread Locker?
The shelf life is typically 12-18 months when stored properly in a cool, dry place. Check the product label for the specific expiration date.
Can I use this product on plastic components?
While the product is generally compatible with plastics, it is recommended to test on a non-critical area first to ensure compatibility, especially if the plastic is under stress.
How much thread locker should I apply?
Apply enough to fully cover the threads of the fastener. Avoid over-application, which can lead to leakage or difficulty in removal.
What temperature range can this thread locker withstand?
The product is designed for a wide range of temperatures. Check the product specifications for exact temperature ranges.
What tools are needed for application?
No special tools are required. You'll need a degreaser or solvent for cleaning, the thread locker, and standard hand tools for assembly and removal.
How do I clean up excess thread locker?
Wipe up excess thread locker with a clean cloth or paper towel. For hardened thread locker, use a solvent.
What if I overtighten the fastener?
Overtightening can make removal more difficult and may damage the fastener or the receiving threads. Use a torque wrench and follow the manufacturer's recommended torque specifications.
Is this product suitable for use on high-vibration applications?
Yes, it is designed to resist loosening caused by shock and vibration, making it suitable for many high-vibration applications.
Troubleshooting
Fastener is difficult to remove.
Apply heat to the fastener with a heat gun or torch. Allow the fastener to cool and then attempt removal again. Be cautious when applying heat to avoid damaging surrounding parts.
Thread locker isn't holding the fastener.
Ensure that the surfaces were properly cleaned and degreased before application. Ensure adequate thread engagement. Verify the product was applied correctly and that sufficient curing time was allowed. If the issue persists, the fastener may be damaged or the wrong type of thread locker was used.
Thread locker is leaking.
Ensure the correct amount of thread locker was used. Make sure the fastener is properly tightened. Check for any damage or imperfections in the threads or surrounding parts.
Pros and Cons
Pros
- Prevents loosening of critical components, improving safety.
- Offers a removable bond, making maintenance and adjustments easier.
- Resists shock and vibration, ensuring long-lasting security.
- Suitable for a wide range of applications and materials.
- Easy to apply with no special tools required.
- Provides a clear visual indication of application.
Cons
- Requires proper surface preparation for optimal adhesion.
- May not be suitable for extremely high-temperature applications.
- Over-tightening can make removal difficult.
- Bond strength is medium, not designed for permanent locking.
- Requires sufficient curing time for the bond to fully develop.
- May require extra effort to remove compared to no thread locker
Setup, Compatibility & Care
- Surface Preparation:
- Clean the threads of the fastener and the receiving hole thoroughly using a degreaser or solvent. Remove any oil, grease, or debris.
- Ensure the surfaces are dry before applying the thread locker.
- Compatibility:
- Compatible with most metals.
- Check compatibility with plastics, particularly if the plastic is under stress.
- Application:
- Apply a sufficient amount of Simply Xtreme Removable Thread Locker to the threads of the fastener.
- Assemble the parts and tighten to the manufacturer's recommended torque specification.
- Curing:
- Allow the thread locker to cure fully. Refer to the product label for specific curing times, which can vary depending on temperature.
- Storage:
- Store the container in a cool, dry place.
- Keep the container tightly closed when not in use.
- Removal:
- To remove, use standard hand tools.
- Apply moderate force to loosen the fastener. Heat can assist with removal of excessively tight fasteners.