Laser Tools OBD Breakout Box & Signal Detector - 8611
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Laser Tools OBD Breakout Box & Signal Detector (8611) is designed for automotive technicians and enthusiasts working with vehicle diagnostics. Its key benefit is providing direct access to OBD socket signals for detailed analysis, while a potential caveat is the need for a basic understanding of automotive electronics to fully leverage its capabilities. The device allows users to monitor signals from various OBD pins, test voltage, and detect communication protocols, enhancing diagnostic accuracy and efficiency. It features selectable pin voltage indication, protocol indicator lights, and protection for diagnostic equipment.
All features
| Model Part Number | 8611 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
What voltage systems does this breakout box support?
The Laser Tools OBD Breakout Box & Signal Detector (8611) supports both 12-volt and 24-volt automotive electrical systems.
Can I use this device with my oscilloscope?
Yes, this device is compatible with oscilloscopes. It comes with adaptors for 2mm and 4mm banana probes, which are commonly used with test equipment.
How does the fused Pin 16 protect my diagnostic equipment?
Pin 16 on the OBD connector typically provides power to diagnostic tools. The fuse in the breakout box acts as a safety device, blowing and disconnecting power if there's an electrical fault in the vehicle's wiring that could damage your expensive diagnostic equipment.
What do the protocol indicator lights signify?
The indicator lights show which communication protocols are active on specific pins. For example, a light on Pin 6 indicates CAN-High communication, and a light on Pin 7 indicates K-Line communication. This helps confirm that the vehicle is communicating as expected.
Do I need to buy separate adaptors for my multimeter?
No, the device includes adaptors for 2mm and 4mm banana probes, which are standard for many multimeters. You can also use standard meter probes directly if they fit the pin access points.
Is an instruction manual included?
Yes, an instruction manual is included with the Laser Tools OBD Breakout Box & Signal Detector (8611) to guide you through its features and usage.
Troubleshooting
No voltage reading on specific pins.
Ensure the device is correctly plugged into the OBD port and that the vehicle's ignition is on. Check that the correct pin is selected for voltage measurement and verify the vehicle's actual pin voltage using a known good source.
Protocol indicator lights are not illuminating.
Verify that the vehicle is attempting to communicate via OBD. Ensure the ignition is on and the engine may need to be running for some communication protocols. Check that the diagnostic scanner is properly connected and attempting communication.
Diagnostic equipment is not working when connected.
Check the fuse in Pin 16 of the breakout box. If blown, replace it with a fuse of the same rating. Ensure that the diagnostic equipment itself is functioning correctly.
Device feels loose in the OBD port.
Gently try to reseat the device. Some OBD ports may have slightly varying tolerances. Ensure no debris is obstructing the connection.
Pros and Cons
Pros
- Enables detailed signal monitoring directly from the OBD port.
- Supports both 12V and 24V systems.
- Offers flexible connectivity options with included adaptors.
- Includes built-in protection for sensitive diagnostic tools.
- Provides visual indication of communication protocols.
Cons
- Requires a basic understanding of automotive electrical systems for optimal use.
- The instruction manual is essential for full functionality.
- Not a standalone diagnostic tool; requires a multimeter or oscilloscope.
Setup, Compatibility & Care
Setup: To set up the Laser Tools OBD Breakout Box & Signal Detector (8611), simply plug the device directly into the vehicle's OBD II diagnostic port. Ensure a secure connection. Once connected, you can attach your multimeter probes or oscilloscope probes to the appropriate banana sockets or directly to the pins if using meter probes. The device is compatible with standard automotive multimeters and oscilloscopes.
Compatibility: This device is designed for use with vehicles that feature a standard 16-pin OBD II connector. It supports both 12-volt and 24-volt automotive electrical systems. Adaptors for 2mm and 4mm banana probes are included.
Care: Keep the device clean and dry. Avoid exposing it to extreme temperatures or harsh chemicals. After use, disconnect it from the OBD port and store it in a safe place. Regularly inspect the pins and sockets for any signs of damage or debris. Ensure the fuse in Pin 16 is intact if experiencing issues with diagnostic equipment power.