Godox iT32 Modular TTL Flash - Nikon
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Godox iT32 Modular TTL Flash is a high-performance lighting solution designed for photographers who demand flexibility and speed in their workflow. Featuring an interchangeable hot-shoe design and the robust Godox 2.4 GHz X-System, this flash provides seamless cross-brand compatibility and precise TTL/HSS control. While its modular construction allows for incredible versatility, users should note that frequent switching of the magnetic hot-shoe modules requires careful handling to ensure long-term electrical contact integrity.
All features
| Brand | Godox |
|---|
Extended Product Information
FAQs
Can I use this flash with cameras other than Nikon?
Yes, provided you purchase and attach the specific hot-shoe module compatible with your alternative camera brand.
How long does the battery take to charge?
Using the USB-C port, the internal lithium battery typically charges to full capacity in roughly 2 to 3 hours depending on the power source.
Does it support firmware updates?
Yes, firmware updates are managed via the USB-C connection to your computer using the Godox G3 software.
Can the iT32 be used as a manual flash?
Yes, the flash features a full Manual mode where you can control power output from 1/1 to 1/256.
Is the flash weather-sealed?
The iT32 is designed for standard professional use but is not fully weather-sealed; avoid exposure to heavy rain or high humidity.
How do I trigger other Godox flashes?
Set your iT32 to Master mode in the wireless menu to command other Godox X-Series units set to Slave mode on the same channel.
Troubleshooting
Flash not firing in TTL mode
Check that the flash is fully seated in the camera hot-shoe and that the X5 module contacts are clean.
Wireless connection failed
Ensure both the iT32 and your slave flashes are set to the same Channel and Group ID within the X-System menu.
Touchscreen unresponsive
Perform a soft reset by powering the unit off and on; ensure the screen is clean and free of moisture.
Pros and Cons
Pros
- Supports multi-brand camera systems through swappable modules
- Fast USB-C charging for the internal lithium battery
- Master/Slave capability via built-in Godox 2.4 GHz receiver
- High-speed sync allows for creative wide-aperture photography
- Easy-to-use touchscreen and dial interface
Cons
- Requires additional modules for non-Nikon camera support
- Magnetic connections require consistent cleaning to prevent connectivity issues
- Internal battery is not user-replaceable in the field
Setup, Compatibility & Care
To set up your iT32, align the magnetic contacts on the X5 hot-shoe module with the base of the flash body until they click securely into place. Power on the unit by pressing the side power button, and use the touchscreen to select your desired TTL or Manual mode.
Compatibility is achieved by ensuring you have the correct hot-shoe module for your specific camera system. To maintain the unit, keep the magnetic contact points clean and free of dust or debris, as these carry the data signals between the shoe and the flash. Always store the unit in its protective case when not in use to prevent damage to the touch-sensitive glass.