Warren Reed Designer Watercolour Splashart Stag Face Glass Kitchen Splashback - 65 x 90cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This premium 6mm toughened glass splashback from Warren Reed - Designer is ideal for homeowners seeking to enhance their kitchen's style and protect walls behind cookers or sinks. It offers superior heat resistance and is exceptionally easy to clean, providing a durable and elegant solution for busy kitchens. A key consideration for installation is the requirement for a specific type of adhesive.
All features
| Model Part Number | WR00426-P453 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What is the best way to clean the glass splashback?
For best results, use a standard glass cleaner and a soft, lint-free cloth or microfiber towel. Wipe gently in a consistent pattern. For tougher grime, a damp cloth followed by glass cleaner can be effective.
Can I install this splashback myself?
While possible for those with DIY experience, installation requires careful handling and the use of specific adhesive. It is recommended to have a second person assist and to follow installation instructions precisely. If unsure, consider hiring a professional installer.
What type of adhesive should I use?
You must use a clear, natural curing adhesive. Do not use solvent-based adhesives or silicone sealants not specifically designed for glass splashbacks, as they can damage the print or the glass.
Is the printed design durable?
Yes, the high-resolution print is applied to toughened glass and is designed to be durable and resistant to fading and damage from normal kitchen use and cleaning.
What are the available sizes for this splashback?
This splashback is available in several sizes, including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
Can this be used behind a microwave or oven?
It is designed primarily for use behind gas or electric hobs and sinks. While it is heat-resistant, extreme, direct, and prolonged heat from an oven door or microwave might exceed its intended operating parameters. Always ensure adequate ventilation.
Troubleshooting
Splashback has streaks after cleaning.
Use a dedicated glass cleaner and a microfiber cloth. Ensure you are wiping in a consistent direction (e.g., vertical or horizontal) and avoid using too much cleaner.
Adhesive is not bonding properly.
Ensure the wall surface is completely clean, dry, and free from dust or grease. Verify that you are using the specified clear, natural curing adhesive and that it is within its expiry date. Allow adequate curing time as per the adhesive instructions before putting the splashback into full use.
Minor chips on edges.
Inspect the edges carefully. If minor, they may not affect functionality but contact the manufacturer for advice on potential repair or if replacement is recommended, especially if the damage compromises the integrity of the glass.
Pros and Cons
Pros
- Enhances kitchen aesthetics significantly.
- Provides excellent protection against splashes and heat.
- Extremely easy to maintain and clean.
- Durable construction with toughened glass.
- Adds a bespoke designer touch to the kitchen.
Cons
- Requires a specific type of clear, natural curing adhesive for installation.
- Glass can be heavy and may require professional installation assistance.
- Risk of breakage if mishandled during installation or immediately after.
- Polished edges, while safe, still require careful handling.
Setup, Compatibility & Care
Installation: For installation, it is crucial to use a clear, natural curing adhesive. Ensure the wall surface is clean, dry, and smooth before applying the adhesive. Follow the adhesive manufacturer's instructions for application and curing times. It is recommended to have a second person assist with holding the splashback during adhesive application and placement.
Compatibility: This splashback is designed for use behind standard gas or electric hobs and sinks. Ensure the selected size fits the intended space. It is not recommended for use directly behind open flame burners or in areas with excessive steam without proper ventilation.
Care: To maintain the pristine appearance of your glass splashback, use a standard glass cleaner or a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can scratch the surface. Wipe up spills and splatters promptly to prevent them from drying and becoming harder to remove. Periodically check the adhesive bond to ensure the splashback remains securely in place.