Rocker Switch - On/Off/On - Round - Black - SPDT
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Switch Electronics Rocker Switch. It provides a comprehensive overview of its features, use cases, and care instructions. The switch is ideal for automotive and similar applications requiring a reliable on/off/on control. A key thing to remember is the importance of proper wiring to avoid damage and ensure safe operation.
All features
| Model Part Number | Does not apply |
|---|---|
| Brand | Switch Electronics |
Extended Product Information
FAQs
What is the panel cutout size?
The panel cutout should be 20mm in diameter.
What is the voltage and current rating of the switch?
The switch is rated for 6A 250VAC / 10A 125VAC.
What type of contacts does this switch have?
The switch has SPDT (Single Pole Double Throw) contacts.
What is the operating temperature range?
The operating temperature range is -25°C to +85°C.
How do I install the switch?
Insert the switch body through the 20mm panel cutout. The snap-in design will hold it securely.
What materials are the terminals made of?
The terminals are made of silver-plated brass.
Can I use this switch in a high-vibration environment?
The switch is suitable for many applications, but ensure all wiring is secure to avoid issues in high-vibration environments.
Troubleshooting
Switch does not operate the connected device.
Check wiring connections and ensure they are secure. Verify the device is functioning correctly and the switch's voltage and current ratings match the application. Inspect the fuse in the circuit.
Device operates intermittently.
Inspect the wiring connections for loose wires or corrosion. Replace the switch if internal contacts are worn.
Switch feels loose in the panel cutout.
Ensure the panel cutout is precisely 20mm. If the cutout is too large, the switch may not be securely held.
Pros and Cons
Pros
- Durable and reliable performance in automotive and industrial settings.
- Easy to install with a snap-in mounting design.
- Versatile SPDT configuration enables multiple circuit control options.
- Wide operating temperature range allows for use in various environments.
- Silver-plated brass terminals ensure good conductivity and corrosion resistance.
Cons
- Requires careful wiring to avoid shorts or damage.
- The switch's small size might be difficult to handle with gloves.
- Limited to the specified voltage and current ratings; not suitable for all applications.
Setup, Compatibility & Care
- Installation:
- Ensure the panel cutout is precisely 20mm in diameter.
- Insert the switch body through the panel cutout.
- The snap-in design will hold the switch securely.
- Wiring:
- Connect wires to the silver-plated brass terminals, ensuring a secure connection.
- Refer to the switch's pin diagram for correct wiring configuration (SPDT).
- Use appropriate gauge wire for the application's current draw.
- Compatibility:
- This switch is designed for use in circuits with a maximum rating of 6A 250VAC / 10A 125VAC.
- Check that the electrical load of the device being controlled does not exceed the switch's rating.
- Care:
- Avoid using excessive force during installation or operation.
- Keep the switch clean and free of moisture and debris.
- Regularly inspect the wiring connections for any signs of corrosion or wear.