Effortlessly remove multiple layers of paint and varnish with Bartoline TX10. This highly effective, non-caustic, methylene chloride-free stripper is quick and easy to use, indoors or outdoors, and is ideal for both DIY enthusiasts and professional users. Bartoline TX10 Paint and Varnish Stripper is a highly effective non-Methylene Chloride stripper ideal for use by inexperienced DIYers as well as professional users. The non-caustic formulation is quick and easy to use, both indoors and out, and can remove multiple layers of paint or varnish at a time. TX10 is a highly effective non Methylene Chloride formulation, which is non flammable and is biodegradable. As the product is water based, there is minimal evaporation. It clings 100% to vertical surfaces, hence no drips, runs or waste. It is suitable for use both indoors and out, by serious professionals and novice DIYers. A generous coating is applied by brush to the surface to be stripped and left for approximately 30 minutes. For areas where there are more than five layers, a second coat maybe be necessary. Once TX10 has penetrated to the substrate, it can be scraped off leaving the surface clean. The stripped area can then be rubbed down using sandpaper, steel wool or a scrubbing brush. TX10 complies with Decision No 455/2009/EC Of The European Parliament And Of The Council Of 6th May 2009 Amending Council Directive 76/769/EEC, which has outlawed the sale of Methylene Chloride Paint Strippers from sale to the general public.