Frenchic Wall Paint - Steaming Green
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Wall Paint in Steaming Green is ideal for DIY enthusiasts and homeowners seeking a versatile, easy-to-use paint for interior surfaces. Its key benefit lies in its all-in-one formulation, acting as a self-priming, self-sealing chalk and mineral paint that dries to an ultra-matte, scrubbable finish. A potential caveat is that while versatile, its primary recommendation is for walls and ceilings, and other surfaces may require specific preparation for optimal adhesion.
All features
| Colour | Green |
|---|---|
| Model Part Number | 39780693508183 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need a primer and top coat with this paint?
No, Frenchic Wall Paint is designed as a self-priming and self-sealing product, meaning no separate primer or top coat is required for walls and ceilings.
How do I clean the painted surface?
Once cured, the paint is washable and scrubbable. Use a damp cloth with mild soap if necessary for cleaning.
What is the coverage of a 2.5l tin?
A 2.5l tin covers approximately 35m² with a single coat. Two coats are recommended, covering approximately 17.5m².
Is this paint safe for children's rooms or toys?
Yes, the paint is EN71-3 certified, making it safe for use on children's toys and in environments frequented by children.
Can I use this paint on radiators?
Yes, it is suitable for powder-coated radiators. Ensure the radiator is clean and dry before application.
What kind of finish does this paint have?
It provides an ultra-matte, chalky finish.
How long does it take to dry?
Recoat time is typically 1-2 hours, but this can vary depending on temperature and humidity. Allow longer if conditions are cooler or more humid.
Troubleshooting
Paint is not adhering well
Ensure the surface was clean, dry, and free from contaminants. For problematic surfaces like gloss paint, metal, or tiles, a suitable primer may be necessary, or ensure adequate light sanding was performed.
Streaky or uneven finish
Ensure the paint was stirred thoroughly. Apply thin, even coats using a good quality brush or roller. Avoid overworking the paint. Allow proper drying time between coats.
Colour appears different than expected
Ensure two coats have been applied for full opacity. Lighting conditions in the room can also affect perceived colour. Check the paint batch for any discrepancies.
Paint is too thick to apply
Stir the paint vigorously. If necessary, a very small amount of water (less than 5%) can be added to aid application, but avoid over-diluting as this can affect finish and durability.
Pros and Cons
Pros
- All-in-one paint simplifies the decorating process.
- Durable, scrubbable finish ideal for busy households.
- Low odour and low VOC content contribute to a healthier environment.
- Versatile application extends beyond walls and ceilings.
- Suitable for use on children's toys due to its certification.
Cons
- Ultra-matte finish can be unforgiving on imperfect surfaces.
- Requires two coats for optimal colour depth and durability.
- May require specific preparation for non-traditional surfaces like metal or tiles.
- Drying time can be impacted by humidity and temperature.
Setup, Compatibility & Care Instructions
Preparation: Ensure surfaces are clean, dry, and free from grease or dust. For previously painted surfaces, a light sanding may improve adhesion. For raw wood, ensure it is clean and dry. For non-porous surfaces like metal or tiles, a specific primer may be beneficial, although the paint is designed for direct application.
Application: Stir the paint thoroughly before use. Apply using a brush or roller. Two thin, even coats are recommended for best results, allowing adequate drying time between coats (typically 1-2 hours, but check conditions). Avoid applying in very high humidity or low temperatures.
Compatibility: Suitable for interior walls, ceilings, wooden furniture, interior woodwork, wooden floors, kitchen cupboards, metal, powder-coated radiators, interior uPVC, and ceramic wall tiles. Always test on a small area first for untested surfaces.
Care: Once fully cured (allow 7 days), the finish is washable and scrubbable. Clean spills and marks promptly with a damp cloth. For tougher stains, use a mild detergent. Avoid abrasive cleaners or excessive scrubbing that could damage the ultra-matte finish.