Shopping.co.uk

Gorilla Contact Adhesive Clear 75G - 2 Pack

Not AvailableGorilla Contact Adhesive Clear 75G - 2 Pack

Achieve strong, permanent adhesion quickly with Gorilla Contact Adhesive Clear — a fast-setting, w...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This Gorilla Contact Adhesive Clear 2-pack is designed for DIY enthusiasts and homeowners seeking a reliable, fast-setting adhesive for repairs and projects. Its key benefit is achieving strong, permanent, and waterproof bonds quickly, with a clear finish ideal for visible applications. A caveat is its suitability primarily for indoor bonding applications on specific materials, and it requires careful surface preparation for optimal adhesion.

All features

ColourWhite
BrandGorilla

Extended Product Information

FAQs

Is this adhesive suitable for outdoor use?

Gorilla Contact Adhesive Clear is primarily recommended for indoor use. While it is waterproof, prolonged exposure to harsh outdoor elements may affect its long-term performance.

How long does it take to cure completely?

The adhesive sets on contact when tacky (usually within 10-20 minutes), allowing for immediate handling. However, a full cure, providing maximum bond strength and water resistance, typically takes 24-72 hours.

Can I use this on Styrofoam?

This adhesive is not recommended for use on Styrofoam or foam plastics, as it may dissolve the material.

What is the best way to apply the adhesive?

Apply a thin, even layer to both surfaces that will be joined. Wait for the adhesive to become tacky to the touch (usually 10-20 minutes) before pressing the surfaces together firmly.

How do I clean up uncured adhesive?

Wipe away any uncured adhesive immediately with a dry cloth. Once cured, the adhesive is very difficult to remove.

What materials is this adhesive NOT recommended for?

It is not recommended for Styrofoam, flexible vinyl, rubber or plastic if the flexibility must be maintained after bonding, or for applications involving direct or indirect food contact.

Does it yellow over time?

Gorilla Contact Adhesive Clear cures to a transparent finish and is designed not to yellow, making it ideal for visible applications.

Troubleshooting

Adhesive not sticking or bonding weakly.

Ensure surfaces were clean, dry, and free of contaminants. Verify that both surfaces were coated and allowed to become tacky before pressing together. Ensure adequate pressure was applied.

Adhesive is too thick or difficult to apply.

Check storage conditions; extreme cold can thicken adhesives. If stored properly, ensure the applicator is not clogged. For minor thickening due to cold, briefly warming the tube (e.g., in warm water) may help, but avoid overheating.

Bond failing after some time.

Confirm the application was for indoor use as recommended. Check if the bonded materials are within the compatible list. Re-evaluate if the bonded area is subject to excessive heat, moisture, or stress beyond the adhesive's capabilities.

Pros and Cons

Pros

  • Fast bonding action saves time on projects.
  • Waterproof formulation ensures durability in various conditions.
  • Clear, non-yellowing finish is aesthetically pleasing for visible repairs.
  • Versatile for use on a wide range of common household materials.
  • Value pack provides sufficient adhesive for multiple tasks.

Cons

  • Primarily intended for indoor use.
  • Requires both surfaces to be coated and allowed to tack before bonding.
  • May not be suitable for all types of plastics; testing is recommended.
  • Requires good ventilation during application and curing.

Setup, Compatibility & Care

Setup:

  1. Ensure surfaces to be bonded are clean, dry, and free from dust, grease, or oil.
  2. Apply a thin, even layer of adhesive to *both* surfaces using the applicator.
  3. Allow the adhesive to dry until it is tacky to the touch (typically 10-20 minutes, depending on temperature and humidity).
  4. Once tacky, carefully align the surfaces and press them together firmly. A strong bond forms immediately upon contact.

Compatibility:

Suitable for wood, laminates, metal trims, rubber, leather, fabric, and select plastics. Test on a small, inconspicuous area first if unsure about material compatibility, especially with plastics.

Care:

Store tubes in a cool, dry place away from direct sunlight. Ensure caps are tightly sealed after use. Clean up any excess uncured adhesive with a dry cloth. Once cured, adhesive is difficult to remove.