Bostik Stix A930 Multi Fibre High Temperature Vinyl & LVT Adhesive - 13Kg - Cream
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Bostik Stix A930 Multi Fibre is a professional-grade, fibre-reinforced adhesive designed for flooring contractors and installers who need a reliable solution for LVT, PVC, vinyl, and rubber floor coverings. Its primary benefit is a high-temperature resistance that prevents bond failure in environments with underfloor heating or significant sunlight exposure, though users should be aware that the 13kg tub size is best suited for medium to large-scale professional projects rather than small residential repairs.
All features
| Colour | Cream |
|---|---|
| Model Part Number | A930 |
| Brand | Bostik |
Extended Product Information
FAQs
Can I use this with rubber flooring?
Yes, it is suitable for rubber coverings up to 3mm thick.
Is it safe for underfloor heating?
Yes, its high-temperature resistance is specifically designed to withstand the conditions created by underfloor heating.
What is the maximum coverage of the 13kg tub?
The 13kg tub provides coverage for up to 43 square metres, depending on the surface porosity and trowel used.
Is this a solvent-based adhesive?
No, it is a solvent-free formula with very low VOC emissions.
Can it be used for outdoor flooring?
No, this adhesive is intended for indoor professional flooring installations only.
How thick can the floor covering be?
The adhesive is rated for floor coverings up to 3mm in thickness.
Troubleshooting
Adhesive is not setting or bonding correctly.
Ensure the subfloor is porous and moisture-free; verify that the ambient temperature is within the recommended application range.
Visible adhesive bumps under the floor covering.
Ensure the adhesive is spread evenly with a properly sized notched trowel and avoid leaving excess pools of glue.
The adhesive has developed a skin in the bucket.
This happens when the lid is not airtight; ensure the lid is fully pressed down after every use to preserve the remaining product.
Pros and Cons
Pros
- Excellent thermal stability under heat loads
- Reinforced structure prevents material movement
- Low VOC formula promotes better air quality
- Strong initial grab simplifies installation of complex patterns
Cons
- Not suitable for materials exceeding 3mm thickness
- Requires professional application techniques
- Bulk 13kg container may be excessive for minor DIY repairs
Setup, Compatibility & Care
Before application, ensure the subfloor is clean, dry, and free of dust or grease. The adhesive should be applied using a notched trowel to achieve the recommended coverage rate.
- Compatibility: Suitable for use with LVT, PVC, vinyl sheet, linoleum, and rubber coverings up to 3mm. Always check the flooring manufacturer's specifications alongside this product.
- Environment: Ensure the room temperature and the adhesive temperature are maintained at suitable levels during installation to ensure proper setting.
- Maintenance: Keep the lid tightly sealed when not in use to prevent the adhesive from drying out. Store in a cool, dry place, protecting it from frost and direct sunlight.