Ceramics Enamel Spray Paint - SolaDirect - White - 2 x 400 mL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SolaDirect Ceramics Enamel Spray Paint is an essential solution for homeowners and DIY enthusiasts looking to restore the appearance of worn-out ceramic and enamel surfaces. This set provides a high-gloss, durable white finish for items like bathtubs, sinks, and appliances, effectively covering scratches and chips. While it offers excellent adhesion and a professional look, it requires careful surface preparation and adequate ventilation, as the aerosol application process demands a steady hand to avoid runs or drips.
All features
| Colour | White |
|---|---|
| Model Part Number | 1415593 |
| Brand | SolaDirect |
Extended Product Information
FAQs
Can I use this inside my bathtub?
Yes, it is designed for bathtubs, but ensure the surface is fully cured (at least 48 hours) before exposing it to water.
Does this paint require a primer?
On most ceramic or enamel surfaces, a primer is not strictly required if you have sanded and cleaned the surface properly; however, a clean, dry surface is essential.
How many coats should I apply?
For best coverage and durability, apply 2 to 3 thin, even coats.
Is this safe for food contact areas?
No, this product is intended for exterior and decorative surfaces only. Do not use on surfaces that come into direct contact with food.
Can I use it on plastic appliances?
Yes, it adheres well to most rigid plastics commonly found on household appliances, provided the surface is cleaned and lightly scuffed.
What should I do if I get overspray on my floor?
Wipe it up immediately with a cloth dampened with mineral spirits or a dedicated paint thinner before it dries.
Troubleshooting
The finish looks bumpy or 'orange-peeled'.
You likely sprayed from too far away or applied the paint when it was too hot. Move closer, use even sweeps, and ensure you are working within the recommended temperature range.
The paint is running or sagging.
You applied too much paint in one area. Apply thinner coats and allow for proper flash-off time between coats.
The spray nozzle is clogging.
After each use, turn the can upside down and spray for 2-3 seconds to clear the valve of residual paint.
Pros and Cons
Pros
- Cost-effective way to refresh old fixtures without replacement
- Provides a high-gloss, professional-grade finish
- Strong adhesion to smooth, non-porous surfaces
- Generous 800ml total volume is sufficient for multiple medium-sized projects
- Quick and easy application compared to brush-on enamels
Cons
- Requires thorough surface sanding and cleaning for best adhesion
- Aerosol spray requires well-ventilated workspaces
- Long curing time required before items can be submerged in water
- Over-spraying can lead to drips or uneven textures
Setup, Compatibility & Care
To ensure the best results, work in a dust-free environment with temperatures between 15°C and 25°C. Always mask off surrounding areas with painter's tape to prevent overspray. Compatibility is broad, covering metal appliances, ceramic sinks, and glazed tiles.
After application, the surface will be touch-dry in a few hours, but it requires at least 24-48 hours of curing time before coming into contact with water or heavy objects. To maintain the finish, use only mild, non-abrasive household cleaners. Avoid using harsh scouring pads that could dull the high-gloss sheen over time.