Liberon Pure Tung Oil 5 Litre - LIBTO5L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Liberon Pure Tung Oil 5 Litre is for woodworkers and homeowners seeking a durable, natural finish for interior and exterior wood. Its key benefit is providing superior resistance to water, alcohol, and food acids, creating a long-lasting, matt surface. A caveat is its drying time, which is longer than some synthetic finishes due to its pure, natural formulation.
All features
| Model Part Number | LIBTO5L |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
What is Liberon Pure Tung Oil?
Liberon Pure Tung Oil is a natural wood finish made from 100% pure tung oil. It provides a durable, water-resistant, and food-safe matt finish for interior and exterior wood.
Is this oil safe for kitchen worktops and food contact items?
Yes, because it is pure and contains no added dryers, it is non-toxic and safe for use on kitchen worktops, salad bowls, cutting boards, and other items that come into contact with food.
How many coats of tung oil should I apply?
For best results, apply 3-6 thin coats. Allow each coat to dry for at least 24 hours before applying the next, wiping off all excess oil after each application.
Can I use this oil on exterior wood?
Yes, it is recommended for use on exterior oak to provide protection against the elements while maintaining a natural appearance.
What is the drying time for this oil?
The drying time for pure tung oil is longer than many synthetic finishes. Allow at least 24 hours between coats, and potentially longer in cool or humid conditions. The final cure can take up to 14-21 days.
How do I clean and maintain an oiled surface?
Clean with a damp cloth and mild soap. Avoid harsh detergents or abrasive cleaners. Minor wear can be touched up with an additional thin coat of tung oil.
Does tung oil leave a shiny finish?
No, Liberon Pure Tung Oil leaves a natural matt finish that enhances the wood grain without adding gloss.
Troubleshooting
Surface remains sticky after application.
This usually means excess oil was not removed properly. Apply a clean cloth dampened with white spirit to wipe away the excess, then allow to dry thoroughly. Ensure complete removal of any standing oil in future applications.
Uneven finish or patchiness.
Ensure the oil was applied evenly and excess was removed consistently. Sand down the affected area lightly, clean, and reapply thin coats, ensuring thorough wipe-off of excess oil.
Long drying times.
Pure tung oil has a natural drying time which can be extended by low temperatures or high humidity. Ensure adequate ventilation and a consistent temperature (ideally 15-20°C) during application and drying.
Water marks or stains appearing.
The surface may not have received enough coats or the oil has worn away. Clean the area, allow it to dry completely, and reapply one or two thin coats of tung oil, ensuring excess is wiped off.
Pros and Cons
Pros
- Provides a highly durable and protective finish.
- Excellent resistance to common household spills like water, alcohol, and food acids.
- Natural and non-toxic, safe for food contact surfaces and children's toys.
- Suitable for both interior and exterior wood applications.
- Leaves a beautiful, natural matt finish that enhances wood grain.
Cons
- Longer drying time compared to some synthetic finishes.
- Requires multiple thin coats for best results, increasing application time.
- May require more frequent maintenance on heavily used surfaces compared to some varnishes.
- Can darken some woods, so testing in an inconspicuous area is recommended.
- Application in cool or humid conditions can further extend drying times.
Setup, Compatibility & Care
Preparation: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Sand smooth if necessary, starting with a coarser grit and finishing with a fine grit (e.g., 240 grit). Wipe away all dust.
Application:
- Apply Liberon Pure Tung Oil thinly and evenly using a clean, lint-free cloth or a brush.
- Allow the oil to penetrate the wood for 15-30 minutes.
- Wipe off any excess oil thoroughly with a clean cloth. Failure to remove excess oil can result in a sticky surface.
- Allow the first coat to dry for at least 24 hours (longer in cool or humid conditions) before applying a second coat. Repeat this process for 3-6 coats, depending on the desired level of protection.
Compatibility: Suitable for all interior hardwoods and softwoods, including kitchen worktops, tables, and general joinery. Also recommended for exterior oak.
Care: Clean the oiled surface with a damp cloth and mild detergent. Avoid abrasive cleaners. For minor scratches or wear, reapply a thin coat of tung oil following the application steps. For regular maintenance, a light buffing with a clean cloth can refresh the finish.