Ronseal Colron Refined Finishing Wax - Clear 325g
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect and enhance the natural beauty of their interior wood surfaces using Ronseal Colron Refined Finishing Wax. The wax provides a soft sheen and lasting protection, making your wood surfaces look their best. A key benefit is the ease of application; however, proper surface preparation is essential for optimal results.
All features
| Model Part Number | 36215 |
|---|---|
| Brand | Ronseal |
Extended Product Information
FAQs
How do I prepare the wood surface?
Clean the wood surface thoroughly to remove any dirt, dust, or old finishes. Sand the surface lightly if necessary to create a smooth surface. Ensure the wood is completely dry before applying the wax.
Can I use this wax on outdoor furniture?
No, this wax is designed for interior use only. Using it outdoors may lead to premature degradation of the finish.
How often should I reapply the wax?
Reapplication frequency depends on the wear and tear the surface experiences. Generally, you may need to reapply the wax every six months to a year, or as needed to maintain the desired sheen and protection.
What kind of cloth should I use to apply the wax?
Use a clean, lint-free cloth to apply the wax. Old t-shirts or microfiber cloths work well.
Can I use this wax on painted wood?
No, this wax is designed for use on bare or previously treated wood surfaces. Applying it over paint will not provide the intended benefits.
Is steel wool necessary for buffing?
Steel wool can help achieve a brilliant finish, but a clean cloth can also be used. For a very smooth finish, use extra fine steel wool, and always follow the grain.
Troubleshooting
Uneven finish after application
Ensure the wax is applied evenly and buffed thoroughly along the wood grain. Multiple thin coats are better than one thick coat.
Wax not drying properly
Make sure the room is well-ventilated and that the surface is clean and dry before application. Check the product's expiration date.
Surface feels sticky after application
Too much wax was applied. Buff the surface vigorously with a clean cloth or steel wool to remove excess wax.
Pros and Cons
Pros
- Easy to apply with a cloth.
- Enhances the natural beauty of wood.
- Provides lasting protection.
- Leaves a soft sheen finish.
- Contains natural waxes like beeswax and carnauba.
Cons
- Requires proper surface preparation (removing old finishes).
- Only suitable for interior use.
- May require multiple coats for desired results.
- Not suitable for exterior wood surfaces.
Setup, Compatibility & Care
To apply Ronseal Colron Refined Finishing Wax, follow these steps:
- Preparation: Ensure the wood surface is clean, dry, and free from old finishes. Use a suitable wood cleaner if necessary.
- Application: Apply the wax thinly and evenly with a clean cloth, following the grain of the wood.
- Drying: Allow the wax to become touch dry.
- Buffing: Buff along the grain with a clean cloth or steel wool to achieve a brilliant finish.
Compatibility: This wax is compatible with most interior wood surfaces. Always test in an inconspicuous area first to check for compatibility and desired finish.
Care: Regularly dust the treated surface with a soft cloth. Avoid using harsh chemicals or abrasive cleaners. Reapply wax as needed to maintain protection and sheen.