Liberon Liquid Wax Polish Black Bison Dark Oak 500ml - MPN:126888
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Liberon Liquid Wax Polish Black Bison is designed for wood enthusiasts and homeowners seeking to nourish, protect, and enhance the natural beauty of all wood types, particularly antiques. Its key benefit is providing a high-lustre, hardwearing finish that resists finger marks and helps conceal minor imperfections. A caveat to note is that its effectiveness is best observed on interior woodwork and may require multiple applications for deeper conditioning.
All features
| Model Part Number | 126888 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
What types of wood can I use this polish on?
Liberon Liquid Wax Polish Black Bison is suitable for all types of interior wood, including hardwoods and softwoods, whether they are new, old, finished, or unfinished.
How often should I reapply the wax polish?
Reapplication frequency depends on usage and environment, but typically every 6 to 12 months is recommended to maintain the finish and protection.
Can this product be used on kitchen cabinets?
Yes, it can be used on interior kitchen cabinets to nourish and protect the wood, providing a durable finish resistant to finger marks.
Is this product suitable for tabletops?
Yes, it is suitable for tabletops, providing a lustrous and hardwearing finish. However, for surfaces that experience heavy moisture or heat, additional protective measures might be considered.
How do I clean my waxed wood surfaces?
Clean waxed surfaces with a soft, damp cloth. Avoid abrasive cleaners or excessive water, which can damage the wax finish.
Can I use this over existing varnish or lacquer?
It is best applied directly to bare wood or over existing wax finishes. If applying over varnish or lacquer, ensure the surface is lightly abraded and clean, though results may vary. For best results, it is recommended to remove old finishes if unsure.
What is the coverage rate?
The estimated coverage is 10-12 square meters per liter, depending on the porosity and condition of the wood.
Troubleshooting
Uneven finish or streaking
Ensure the wax was applied thinly and evenly. Buff thoroughly after drying. For very dry wood, a second coat may be needed after the first has fully dried.
Wood appears too dark after application
This may be due to the 'Dark Oak' shade. For a lighter finish, consider using the Liberon Liquid Wax Polish Black Bison Clear or Medium Oak variants. You may need to lightly sand and reapply a clear coat if the darkening is undesirable.
Wax not drying properly
Ensure the application was thin and that the room has adequate ventilation. Avoid applying in very cold or damp conditions. Check that the product has not exceeded its shelf life.
Difficulty in buffing to a shine
Allow sufficient drying time before buffing. Ensure you are using a clean, soft cloth and buffing vigorously. If the surface feels sticky, it may need more drying time or a thinner application next time.
Pros and Cons
Pros
- Provides a beautiful, lasting shine.
- Effectively protects wood from drying out.
- Helps to mask minor surface damage.
- Easy to apply to large areas.
- Offers good resistance to everyday marks.
Cons
- Primarily for interior use.
- May require multiple coats for best results on very dry wood.
- Not suitable for exterior applications.
- Drying time needs to be considered for multi-coat applications.
- Specific shades (Clear, Medium Oak) might be preferred for certain wood tones.
Setup, Compatibility & Care
Application: Ensure the wood surface is clean, dry, and free from dust or old finishes. Apply Liberon Liquid Wax Polish Black Bison thinly and evenly using a clean, lint-free cloth, a brush, or a spray applicator. Work with the grain of the wood.
Drying Time: Allow a minimum of 1 hour for the first coat to dry. Subsequent coats may be applied after this period. For best results, allow longer drying times between coats if possible.
Buffing: Once dry, buff the surface with a clean, soft cloth or a polishing brush to achieve a high sheen. For very large areas, a floor polisher can be used.
Tool Cleaning: Clean brushes and cloths immediately after use with Liberon White Spirit.
Compatibility: Suitable for all types of wood, including new and old, finished and unfinished interior woodwork. It is particularly effective on large surfaces like doors, panelling, and staircases.
Care: Reapply as needed, typically every 6-12 months depending on wear, to maintain protection and appearance.