Clarke Drying Gun - CAT221
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Clarke Drying Gun - CAT221 is designed for professionals who need to accelerate the drying time of water-based paints, particularly in localized or spot repair applications. Its key benefit is speeding up processing to achieve a professional finish faster, reducing rework. A potential caveat is its reliance on a compressor air supply, requiring additional equipment.
All features
| Model Part Number | CAT221 |
|---|---|
| Brand | Clarke |
Extended Product Information
FAQs
What type of paints can this drying gun be used with?
The Clarke Drying Gun CAT221 is designed specifically for the rapid drying of water-based paints.
What is the maximum recommended working pressure?
The maximum working pressure for this drying gun is 90psi.
What air consumption rate is recommended?
The air consumption ranges from 7cfm at 40psi to 15cfm at 90psi, depending on the required airflow.
Does it come with an air compressor?
No, this product is a drying gun and requires a separate air compressor with a 1/4" BSP fitting to operate.
How do I maintain the air filter?
The air filter should be checked and cleaned periodically to ensure optimal performance and prevent particle contamination. Refer to your air compressor's manual for specific filter cleaning instructions.
Is this gun suitable for large areas?
This gun is ideal for localized or spot repair applications. For larger areas, alternative drying methods might be more efficient.
Troubleshooting
Low or no airflow
Check the air compressor is running and supplying pressure. Ensure the hose connection is secure and not leaking. Verify the air filter is clean and not blocked. Check the adjustable airflow setting is not fully closed.
Uneven drying pattern
Adjust the distance from the surface. Vary the airflow setting to find the optimal balance. Ensure the nozzle is clean and free from obstructions.
Air leaks from the fitting
Ensure the 1/4" BSP connection is securely tightened. Use appropriate thread sealant or tape if necessary.
Pros and Cons
Pros
- Significantly speeds up drying of water-based paints.
- Lightweight construction reduces user fatigue during prolonged use.
- Air filter minimizes dust contamination for a cleaner finish.
- Adjustable airflow offers precise control over the drying process.
- Suitable for spot repairs and localized drying applications.
Cons
- Requires a compatible air compressor to operate.
- May not be suitable for very large surface areas due to its spot-repair focus.
- Operational noise level is dependent on the connected compressor.
Setup, Compatibility & Care Instructions
Setup: Connect the drying gun to a suitable air compressor using a standard 1/4" BSP fitting. Ensure the compressor is turned off before connecting. Adjust the desired working pressure to a maximum of 90psi. For optimal performance, the air supply should provide between 7cfm at 40psi and 15cfm at 90psi.
Compatibility: This gun is designed for use with air compressors providing a 1/4" BSP output. It is specifically intended for drying water-based paints and coatings.
Care: After each use, clean the exterior of the gun with a slightly damp cloth. Periodically check and clean the air filter according to the compressor manufacturer's guidelines to ensure optimal airflow and prevent contamination. Store the gun in a dry, clean environment.