Milano Edge 600mm Wall Hung Vanity Unit with Basin - Navy Blue - Brushed Copper


Currently unavailable


Currently unavailable
This guide is for homeowners and renovators seeking a stylish and space-saving bathroom vanity. The Milano Edge 600mm wall-hung vanity unit offers a minimalist aesthetic with practical storage and soft-close doors, significantly enhancing bathroom functionality and visual appeal. A key caveat is that it requires assembly, so allow adequate time for installation.
| Colour | Copper |
|---|---|
| Model Part Number | BFCMEW600N_var12 |
| Brand | Milano |
The basin has a single tap-hole, so it is compatible with any standard mono basin tap.
No, the Milano Edge vanity unit requires assembly. All necessary fixings for assembly are included.
Unit Dimensions: W 606mm x D 395mm x H 720mm. Basin Dimensions: W 610mm x D 395mm x H 18mm.
Yes, the unit is constructed from moisture-resistant FSC certified engineered wood.
Clean the basin with a soft cloth and mild, non-abrasive bathroom cleaner. Avoid harsh chemicals or abrasive pads.
The T-Bar Brushed Copper handles are attached during assembly and can typically be replaced with other compatible hardware if desired.
While specific weight limits are not provided, the adjustable shelf is designed to hold standard bathroom items like toiletries and cleaning products.
Adjust the soft-close hinges. There are usually small screws on the hinge mechanism that allow for up/down, left/right, and in/out adjustments.
Ensure the unit is securely fixed to the wall using appropriate wall fixings. Check that the wall studs or anchors are properly installed and load-bearing.
Check that the overflow is not blocked and that the basin waste is installed correctly and is not leaking.
Contact the retailer or manufacturer with your order details and a description of the missing/damaged parts.
Setup: This vanity unit requires assembly. Ensure you have the necessary tools, including a screwdriver and possibly a drill for wall mounting. Follow the included assembly instructions carefully, paying attention to the orientation of panels and the installation of the soft-close hinges.
Compatibility: The basin is pre-drilled with a single tap-hole, making it compatible with any standard mono basin tap. Ensure your chosen tap has a suitable reach for the basin width. Wall mounting requires appropriate fixings for your wall type (e.g., masonry, stud walls); these are typically not included.
Care: The ceramic basin can be cleaned using standard bathroom cleaners and a soft cloth. Avoid abrasive materials that could scratch the glaze. The unit's exterior, made from moisture-resistant engineered wood, should be wiped clean with a damp cloth and mild detergent. Ensure any spills are dried promptly to maintain the finish.