Frenchic Trim Paint - Hot Lips - Red


Currently unavailable


Currently unavailable
This guide is for DIY enthusiasts and homeowners looking to add a vibrant, durable splash of color to interior projects. The key benefit is a high-quality, easy-to-use paint that requires minimal preparation and no top coat, saving time and effort. A potential caveat is that the bright scarlet shade, while striking, may not suit all interior aesthetics and requires careful application for a flawless finish. Frenchic Trim Paint in 'Hot Lips' is a water-based chalk and mineral paint offering a soft-satin sheen, designed for interior woodwork, furniture, and more, with a robust, scuff-resistant finish.
| Colour | Red |
|---|---|
| Model Part Number | 40315049902167 |
| Brand | Frenchic |
No, Frenchic Trim Paint is self-priming and self-sealing, meaning it typically does not require a separate primer or top coat for most interior applications.
Drying times can vary based on humidity and temperature. Generally, it is touch-dry within 1-2 hours, but it's best to allow longer before applying a second coat or using the painted item.
A 500ml tin covers approximately 7m² for a single coat. Two coats are recommended for durability, covering approximately 3.5m² per 500ml tin.
Yes, it is suitable for kitchen cupboards and built-in furniture. Its durable and wipeable finish makes it a practical choice for this application.
Yes, it is EN71-3 certified, making it safe for use on children's toys and furniture.
Clean the painted surface with a damp cloth. For tougher marks, use a mild soap and water solution. Avoid abrasive cleaners to maintain the finish.
Yes, it is suitable for use on powder-coated radiators.
Stir the paint thoroughly. If lumps persist, you may need to strain the paint through a fine sieve.
Ensure you are applying thin, even coats. Use a good quality brush and maintain a wet edge. Allow the paint to dry completely and consider a light sanding if necessary before applying a second coat.
Check that the surface was properly cleaned and dry before application. Ensure there was no grease or silicone present. For very glossy surfaces, a light scuff with fine-grit sandpaper might improve adhesion.
Color can vary based on the underlying surface color and the number of coats applied. Ensure two coats are applied for the truest representation of 'Hot Lips' red. Lighting conditions also affect color perception.
Setup: Ensure the surface is clean, dry, and free from grease or loose material. Light sanding may be beneficial for very glossy surfaces, though often not required. Stir the paint thoroughly before use.
Compatibility: This paint is suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal surfaces, and a wide range of furniture including wood and laminate. It is also certified EN71-3 safe for use on children's toys.
Care: For best durability, two coats are recommended. Allow adequate drying time between coats (typically 1-2 hours, but refer to product packaging for specific times). The finish cures over time, becoming more robust. Clean brushes and equipment with water immediately after use. For cleaning the painted surface, use a damp cloth and mild soap if necessary. Avoid abrasive cleaners.