Mac Allister M2 Pressure Washer - Corded - 145Bar - 1.8Kw

You can connect the Mac Allister M2 to a standard garden hose connected to a mains water supply. Do not use water from a standing source like a water butt unless a suitable filter and pump are used to ensure adequate flow and pressure.

Always disconnect the spray gun from the hose and ensure the trigger is released before changing nozzles. Most nozzles click or screw into place at the end of the spray lance.

The Mac Allister M2 is designed to work with detergent if you have a compatible detergent dispenser or bottle attachment. Refer to your specific accessory instructions for usage.

This pressure washer is designed for cold water use only. Using hot water can damage the pump and seals.

It is recommended to clean the water filter after every few uses, or more frequently if you notice a drop in pressure, to ensure optimal performance and longevity of the machine.

Please refer to the product manual or the retailer's website for the most current warranty information specific to your purchase.

Check that the power cord is securely plugged into a working outlet. Ensure the water supply is turned on and the hose is connected correctly.

Verify that the water supply is adequate. Check the water filter for blockages and clean it. Ensure all hose connections are tight. Try a different nozzle setting if applicable.

Ensure the high-pressure hose and garden hose are securely tightened at both ends. Check O-rings and seals for damage and replace if necessary.

The thermal overload protection may have activated due to overheating. Allow the unit to cool down for 15-20 minutes before restarting. Ensure the air vents are not obstructed.