Draper Gravity Feed HVLP Air Spray Gun 100ml - 09709
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the Draper 09709 Gravity Feed HVLP Air Spray Gun. It provides a comprehensive overview of the spray gun's features, how to use it effectively, and troubleshooting tips. The key benefit is its ability to apply all paint types, including water-based, with precision and control. However, users should be aware of the 100ml capacity, which may require frequent refills for larger projects.
All features
| Model Part Number | 09709 |
|---|---|
| Brand | Draper |
Extended Product Information
FAQs
What type of air compressor do I need?
You need an air compressor that can supply at least 8cfm (226 L/min) at 30 psi (2 Bar).
What is the correct paint viscosity?
Follow the paint manufacturer's recommendations for thinning. The correct viscosity will help with the paint application.
How do I clean the spray gun?
Disassemble the spray gun and clean all parts with the appropriate solvent for the paint type. Use the cleaning brush to clean the nozzle.
What is the warranty period?
The product comes with a 6-month warranty (terms and conditions apply).
Can I use water-based paints?
Yes, the Draper 09709 is suitable for use with all paint types, including water-based paints.
What are the key safety precautions?
Always wear appropriate safety gear, including a respirator, eye protection, and gloves. Work in a well-ventilated area.
How often should I clean the spray gun?
Clean the spray gun thoroughly after each use to prevent clogging and ensure optimal performance.
Troubleshooting
Spray gun is not spraying paint.
Check that the air compressor is turned on and supplying air. Ensure the fluid nozzle is not clogged. Clean the nozzle with the cleaning brush.
Paint is spitting or splattering.
Adjust the fluid flow control and air pressure. Ensure the paint is properly thinned according to the manufacturer's instructions. Clean the nozzle.
Uneven paint distribution.
Adjust the fan control to achieve the desired spray pattern. Ensure that the spray gun is held at a consistent distance from the surface and moved at a consistent speed.
Air leaks from the spray gun.
Check all connections for tightness. Inspect the seals and replace if necessary. Check the air inlet connection.
Pros and Cons
Pros
- Lightweight design for comfortable use.
- Suitable for all paint types, including water-based.
- Adjustable fan and flow for precise control.
- Compact 100ml capacity ideal for detail work.
- Easy to clean and maintain with included accessories.
Cons
- 100ml capacity may require frequent refilling for larger projects.
- Requires an air compressor for operation.
- Air consumption of 8cfm (226 L/min) may require a compressor with sufficient capacity.
- Not ideal for very large surfaces due to the small capacity.
Setup, Compatibility & Care
Setup:
- Attach the air inlet connector (provided) to the spray gun.
- Connect the air hose from your air compressor to the connector.
- Fill the 100ml cup with the appropriate paint.
- Adjust the fan control and flow control to the desired settings.
- Test the spray pattern on a piece of scrap material before starting your project.
Compatibility:
The Draper 09709 is compatible with all paint types, including water-based paints. It requires an air compressor with a minimum operating air pressure of 30 psi (2 Bar) and an average air consumption of 8cfm (226 L/min).
Care:
- After each use, thoroughly clean the spray gun.
- Disassemble the gun and clean all parts with appropriate solvents.
- Use the cleaning brush provided to remove paint from the nozzle and other small areas.
- Store the spray gun in a clean, dry place.