Mr. Colour Paints (C-XXX) are Solvent-Based Acrylic Paints. Manufacturer: Mr. Hobby
Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for model enthusiasts using Mr. Hobby Acrylic Model Paint (C-XXX). It provides essential information for achieving professional results with this solvent-based acrylic paint. While known for its fine finish, remember to use proper ventilation due to the solvent base.
| Model Part Number | 338 |
|---|---|
| Brand | Mr Hobby |
Use Mr. Hobby Thinner, specifically designed for this paint. Other thinners might not be compatible.
Yes, but be sure to prime the metal surface first for best adhesion.
Drying time varies depending on humidity and coat thickness. Generally, it dries to the touch within 30 minutes to an hour, but allow several hours for a full cure.
Disassemble your airbrush and clean the components with Mr. Hobby Thinner. Pay special attention to the nozzle and needle.
Use in a well-ventilated area. Wear a respirator mask to avoid inhaling paint fumes. Wear gloves to prevent skin contact. Dispose of waste responsibly.
Yes, Mr. Hobby paints are designed to be mixed to create custom colors.
Store in a cool, dry place away from direct sunlight. Make sure the cap is tightly sealed to prevent the paint from drying out.
Ensure proper thinning with Mr. Hobby Thinner. Check the airbrush settings or environment (humidity and temperature) to resolve the issue.
Ensure the model surface is properly cleaned and primed. Check to make sure the paint is compatible with the model's material.
Apply thinner coats and use a high-quality brush. For a smoother finish, consider using an airbrush.
*Preparation:* Clean the model surface with a suitable cleaner to remove any dust, oils, or mold release agents. Use a primer designed for model painting to improve paint adhesion.
*Thinning:* Thin the paint with Mr. Hobby Thinner (sold separately) for airbrushing or for smoother brush application. The recommended ratio can vary, so experiment to find the optimal consistency.
*Application:* Apply thin, even coats. Avoid applying thick coats, which can lead to runs or uneven finishes. Allow each coat to dry completely before applying the next.
*Cleaning:* Clean your brushes and airbrush immediately after use with Mr. Hobby Thinner or a suitable solvent. Properly dispose of used cleaning materials.
*Storage:* Store the paint in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed to prevent the paint from drying out.
