Barrettine Wood Preserver - Green Resin

Provides a water repellent finish on pressure treated timber which has been cut or drilled in any ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to protect their pressure-treated timber from rot and decay, particularly after cutting or drilling. The Barrettine Cut End Wood Preserver provides a water-repellent finish, preventing fungal growth and insect attacks, extending the life of your wood. Keep in mind that while it's effective, proper application and adherence to drying times are crucial for optimal results.

All features

Model Part NumberTEGR001
BrandBarrettine

Extended Product Information

FAQs

How much area does one litre of the preserver cover?

One litre of the preserver will cover approximately 5.5 square meters.

How long does it take for the preserver to dry?

The preserver is rainproof in 90 minutes and fully dries within 12 hours.

Can I use this on non-pressure-treated wood?

While it can provide some protection, this product is specifically formulated for use on pressure-treated timber.

What should I use to clean my brushes after use?

Clean brushes with the appropriate solvent for oil-based products after use.

Is this product suitable for use on decking?

Yes, it is ideal for use on decking boards and other cut pressure-treated timbers.

Does this product protect against wood-boring insects?

Yes, the Barrettine Cut End Wood Preserver protects against wood-boring insects.

What are the active ingredients in this product?

The active ingredients are Tebuconazole, IPBC and Permethrin.

Troubleshooting

Preserver not penetrating the wood.

Ensure the wood surface is clean and dry. Lightly sand the surface if necessary. Ensure even application and that the wood is pressure treated.

Uneven finish after application.

Ensure even application with a brush, avoiding excessive product in one area. If needed, wipe off excess and reapply with a more even coat.

Product appears to be running or dripping.

Apply in thin, even coats. Avoid applying the preserver in direct sunlight or high temperatures to prevent the solution from drying too quickly.

Pros and Cons

Pros

  • Effective protection against rot and fungal decay.
  • Easy to apply with a brush.
  • Rainproof in just 90 minutes.
  • Long-lasting effect due to the use of resins and oils.
  • Specifically formulated for pressure-treated timber.

Cons

  • Requires proper application to ensure effectiveness.
  • Drying time of 12 hours is required before full use.
  • Coverage is limited to 180ml per square meter.
  • May require reapplication over time depending on weather exposure.

Setup, Compatibility & Care

  1. Preparation: Ensure the wood surface is clean, dry, and free from loose debris before application.
  2. Application: Apply the preserver using a brush, ensuring even coverage over the exposed end grains.
  3. Coverage: Apply 180ml per square meter.
  4. Drying Time: Allow 12 hours for complete drying. The product is rainproof within 90 minutes.

Compatibility:

  • Specifically designed for use on pressure-treated timber.
  • Compatible with most types of wood used in outdoor applications.

Care:

  • Store in a cool, dry place, away from direct sunlight.
  • Clean brushes with the appropriate solvent after use.
  • Reapply as needed, depending on weather exposure and wear.