Sealey Brake Reservoir Cap 42mm - Straight Connector - VS820SA
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the Sealey Brake Reservoir Cap VS820SA, designed to work with Sealey brake bleeding systems. The key benefit is its direct compatibility with specific Sealey models, ensuring a secure and leak-free connection. However, users should note this cap is specifically designed for the mentioned Sealey models, and may not be compatible with other brands or systems.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | VS820SA |
| Brand | Sealey |
Extended Product Information
FAQs
Which Sealey models is this cap compatible with?
The VS820SA is compatible with Sealey models VS820, VS821, and VS0204A.
What is the diameter of the cap?
The diameter of the cap is 42mm.
What material is the cap made of?
The material is not specified in the product description, but it's designed to be durable for brake bleeding.
How do I install the cap?
Simply fit the cap securely onto the brake fluid reservoir of your compatible Sealey bleeding system.
What should I do if the cap leaks?
Ensure the cap is properly seated and tightened. Check for any damage to the cap or reservoir. Inspect the seal.
Can I use this cap with other brake bleeding systems?
No, this cap is specifically designed for use with Sealey VS820, VS821, and VS0204A brake and clutch bleeding systems.
How do I clean the cap?
Clean the cap after each use with a clean cloth to remove any brake fluid residue.
What is the warranty on the Sealey Brake Reservoir Cap VS820SA?
Warranty information is not available in the product description.
Troubleshooting
Cap doesn't fit the reservoir.
Ensure you are using the correct Sealey bleeding system model. Double-check the reservoir diameter for compatibility.
Leakage occurs during bleeding.
Check the cap's seal and ensure it is properly seated. Inspect for any damage to the cap or reservoir. Tighten the cap, but do not overtighten.
Cap is difficult to remove.
Gently twist and pull the cap. If it's stuck, inspect for any obstructions or fluid residue that may be causing it to adhere.
Pros and Cons
Pros
- Ensures a leak-free connection, critical for effective brake bleeding.
- Specifically designed for Sealey models, guaranteeing compatibility.
- Straightforward installation simplifies the bleeding process.
- Durable construction ensures longevity.
- Genuine Sealey part provides confidence in quality.
Cons
- Limited compatibility; only works with specific Sealey models.
- Requires the user to already own a compatible Sealey bleeding system.
- May require additional adapters for certain reservoir types.
- A small component, easily misplaced if not stored carefully.
Setup, Compatibility & Care
Setup:
- Ensure you have a compatible Sealey brake bleeding system (VS820, VS821, or VS0204A).
- Identify the brake fluid reservoir on the vehicle.
- Remove the existing cap (if applicable).
- Attach the VS820SA cap securely to the reservoir.
Compatibility:
- Exclusively compatible with Sealey VS820, VS821, and VS0204A brake and clutch bleeding systems.
- Verify the reservoir size (42mm diameter) for a proper fit.
Care:
- Clean the cap after each use to remove any brake fluid residue.
- Inspect the cap for any signs of damage or wear before each use.
- Store the cap in a clean, dry place when not in use.
- Avoid over-tightening the cap during installation.