Foam Tape Double Sided Waterproof Mounting Tape - 10m - 25mm - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The TIMESETL Double-Sided Foam Tape is an ideal solution for DIY enthusiasts, automotive technicians, and homeowners looking for a heavy-duty, weather-resistant adhesive for mounting trims, signs, and decorative items. Offering high-tack, anti-aging acrylic glue that resists both extreme heat and moisture, it provides a permanent bond on surfaces like metal, plastic, and tile; however, users should note that the high-tack nature of the adhesive may be difficult to remove once fully cured, necessitating careful placement during initial application.
All features
| Colour | Green |
|---|---|
| Model Part Number | TXJ-032-EU |
| Brand | TIMESETL |
Extended Product Information
FAQs
Is this tape safe for automotive paint?
Yes, it is designed for automotive use, but ensure the paint is factory-cured and intact before application.
Can I use this on brick or concrete walls?
This tape is not recommended for porous surfaces like bare brick or concrete as the adhesive will not form a reliable bond.
Is the tape removable?
It is intended as a permanent mounting solution. Removal may require a heat gun and an adhesive remover to avoid damaging delicate surfaces.
Does the tape turn yellow over time?
No, the acrylic glue is anti-aging and UV-resistant, meaning it will maintain its clarity and bond strength in sunlight.
What is the thickness of the foam?
The tape has a thickness of 1mm, which provides enough cushion to account for slight surface irregularities.
Troubleshooting
Tape is not sticking to the surface
Ensure the surface was cleaned with a degreaser or alcohol and is completely dry before application.
Item is falling off after mounting
Verify the weight of the object is within reasonable limits and ensure you have applied enough surface area of the tape to distribute the load.
Difficulty removing the green protective film
Use a pair of tweezers or a fingernail at the edge of the tape to gently lift the corner of the film.
Pros and Cons
Pros
- Excellent weather and water resistance for outdoor use
- Withstands extreme temperature fluctuations
- Provides effective vibration and shock absorption
- Compatible with a wide range of common household and automotive surfaces
- Easy to cut and apply with the removable green PE film
Cons
- High-tack bond may be difficult to reposition after application
- Not recommended for use on loose or peeling painted surfaces
- May require professional removal agents if left for extended periods
Setup, Compatibility & Care
To achieve the best results with your tape, follow these setup guidelines:
- Surface Preparation: Ensure the surface is clean, dry, and free of dust or grease. Using isopropyl alcohol is recommended for optimal adhesion.
- Application: Peel back the green PE film and apply the tape to the item being mounted. Apply firm, even pressure for 10-20 seconds to activate the pressure-sensitive adhesive.
- Curing Time: While the tape has an immediate tack, it reaches its maximum bonding strength after 24 hours. Avoid subjecting the bond to heavy loads immediately.
- Compatibility: Safe for use on finished wood, metal, glass, tile, and most plastics. Not suitable for porous surfaces like brick or raw drywall without a primer.
- Care: Store in a cool, dry place away from direct sunlight to maintain the integrity of the acrylic adhesive over time.