Fernox Hawk Jointing Compound - White - 400g
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Fernox Hawk White Jointing Compound. It ensures secure and reliable seals in various pipe applications, offering a dependable solution for professionals and DIY users. A key consideration is its suitability for specific fluids and pipe sizes; always check compatibility. This guide provides essential information for effective use.
All features
| Colour | White |
|---|---|
| Model Part Number | 61024 |
| Brand | Fernox |
Extended Product Information
FAQs
What is Fernox Hawk White Jointing Compound used for?
It is used to seal pipe joints and threads in various applications, including natural gas, water, and steam systems.
What types of pipes is it suitable for?
It is suitable for pipe diameters up to 25mm. For larger pipework, use with reinforcement fiber.
Is it safe to use with drinking water?
Yes, it is suitable for non-potable water applications.
Can I use it on medical gas lines?
No, it is not suitable for medical air lines.
How do I apply the compound?
Apply a thin, even layer to the threads of the pipe fittings before screwing them together.
How should I store the jointing compound?
Store in a cool, dry place with the container tightly sealed when not in use.
What standards does it conform to?
It conforms to BS EN 751-2 Class A.
Is the compound flammable?
No, the compound is non-flammable.
Troubleshooting
Joint leaks after application.
Check the tightness of the fittings and reapply the compound if necessary. Ensure that the threads are clean and free from any debris.
Compound appears dry or thick in the container.
Ensure the container is properly sealed after each use. If the compound is too thick, it may not apply correctly. If it’s very old, consider replacing it.
Difficulty in applying the compound.
Ensure that the surfaces of the pipe are clean and the compound is applied evenly. If the compound is too thick, replace it.
Pros and Cons
Pros
- Suitable for a wide range of fluids, including natural gas and non-potable water.
- Easy to apply on pipe threads and joints.
- Environmentally friendly and conforms to relevant standards.
- Suitable for use on pipes up to 25mm in diameter.
- Non-flammable, enhancing safety during use.
Cons
- May require reinforcement fiber for pipework over 25mm.
- Not suitable for medical air lines.
- Specific fluid compatibility must be checked before application.
- Requires proper application to ensure effective sealing.
Setup, Compatibility & Care
- Preparation: Ensure the pipe threads and joints are clean and free from debris, rust, or old sealant.
- Application: Apply a thin, even layer of Fernox Hawk White to the threads of the pipe fittings. Avoid excessive application.
- Assembly: Screw the fittings together firmly. Refer to the manufacturer's instructions for torque specifications.
- Compatibility: This compound is compatible with natural gas, non-potable water, steam, air, brine, alcohol, and L.P. gas. However, it's not suitable for medical air lines.
- Care: Store the compound in a cool, dry place. Ensure the container is tightly sealed when not in use to prevent drying out.