Integral LED Evofire Maxi Downlight - Polished Chrome
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Integral LED Evofire Maxi Downlight in Polished Chrome is designed for homeowners and installers seeking a sleek, modern, and safe lighting solution. Its key benefit is flexible, cool-running illumination with a virtually seamless aesthetic due to its ultra-thin bezel. A potential caveat is its specific GU10 lamp fitting, requiring compatible bulbs.
All features
| Colour | Silver |
|---|---|
| Model Part Number | ILDLFR70K184 |
| Brand | Integral LED |
Extended Product Information
FAQs
Does this downlight come with a GU10 bulb?
No, the Integral LED Evofire Maxi Downlight requires a separate GU10 lamp, which is sold independently. Please ensure you select a compatible lamp.
What is the maximum wattage for the GU10 lamp?
Refer to the product's technical specifications or packaging for the maximum recommended wattage for the GU10 lamp to ensure safe operation and prevent overheating.
Can this downlight be used in a bathroom?
This downlight has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is suitable for dry indoor areas only and should not be used in bathroom zones that require higher IP ratings for moisture protection.
How do I adjust the tilt angle?
The downlight can be tilted up to 20 degrees. Gently adjust the angle of the lamp holder by hand after installation to direct the light as desired. Ensure the fixture is powered off before making adjustments.
What are the fire rating certifications?
The downlight is fully certified with 30, 60, and 90-minute fire ratings, compliant with relevant building regulations for fire safety.
What are the overall dimensions of the downlight?
The dimensions are 85mm in height, 85mm in width, and 49mm in depth. The required ceiling cut-out diameter is typically between 70mm and 100mm.
How do I clean the polished chrome finish?
Disconnect power. Use a soft, dry or slightly damp cloth to wipe the surface. Avoid using abrasive cleaning agents or solvents, as these can damage the finish.
Troubleshooting
Downlight does not illuminate.
Check that the power supply is switched on at the mains. Verify that the GU10 lamp is correctly seated in the socket and is functional. Ensure all wiring connections to the terminal block are secure and correctly made.
Light flickers intermittently.
This could be due to a loose lamp connection or a faulty GU10 lamp. Reseat the lamp firmly. If the issue persists, try a new, compatible GU10 lamp. Check wiring connections for any signs of looseness or damage.
Downlight appears loose in the ceiling.
Ensure the spring clips are fully engaged and pressing firmly against the ceiling material. If the ceiling material is compromised or the cut-out is too large, additional support or sealing may be required.
Bezel does not sit flush.
Check the ceiling cut-out size; it may be too small or too large. Ensure no obstructions behind the downlight are preventing it from sitting flat against the ceiling.
Pros and Cons
Pros
- Sleek, modern design with an ultra-thin bezel for a seamless look.
- Tiltable head for directional lighting control.
- Improved lamp longevity due to cooler operating temperatures.
- Certified fire ratings (30, 60, 90 minutes) for safety compliance.
- Simple and efficient installation process.
- Durable polished chrome finish.
Cons
- Requires a separate GU10 lamp, which is not included.
- IP20 rating means it's not suitable for bathroom zones requiring higher protection.
- The tilt mechanism may add a slight complexity during initial bulb replacement compared to fixed downlights.
Setup, Compatibility & Care
Setup:
- Cut Hole: Ensure the ceiling cut-out is appropriate for the downlight's dimensions (70-100mm). Refer to the product's template if provided.
- Wire Connections: Utilize the loop-in/loop-out piano-key style terminal block for connecting the mains power supply. Ensure all connections are secure and comply with electrical regulations.
- Install Lamp: Insert a compatible GU10 lamp (sold separately) into the socket.
- Fit Downlight: Place the downlight into the ceiling aperture, ensuring it sits flush.
- Secure: The downlight should have a spring-loaded mechanism to hold it firmly in place.
Compatibility:
- Lamp Type: Compatible with standard GU10 lamps. Always check the maximum wattage and type (e.g., LED, halogen) recommended by the manufacturer for optimal performance and safety.
- Ceiling Thickness: Suitable for standard ceiling thicknesses. Refer to product specifications for exact limits.
- Fire Ratings: Certified for 30, 60, and 90-minute fire resistance, suitable for use in areas requiring these building regulation compliances.
- Environment: IP20 rated, suitable for dry indoor areas only.
Care:
- Cleaning: Disconnect power before cleaning. Wipe the fixture and bezel with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Lamp Replacement: After disconnecting power, gently remove the old lamp and insert a new compatible GU10 lamp. Ensure the downlight is cool before attempting replacement.