Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Anaglypta Townsend Wallpaper in White is ideal for homeowners and decorators looking to refresh walls with a durable, paintable surface that can hide imperfections. Its key benefit is the textured, embossed floral design that provides a premium look after painting, though a caveat is the need to purchase enough rolls at once to ensure batch number consistency for a seamless finish.
| Colour | White |
|---|---|
| Model Part Number | RD340 |
| Brand | Anaglypta |
No, it's best to allow the wallpaper adhesive to dry completely, typically for at least 24 hours, before applying any paint.
Most standard interior paints like emulsion, vinyl, or acrylic paints can be used. It's recommended to do a test patch first.
The wallpaper is washable. Use a soft, damp cloth or sponge to gently wipe away marks. Avoid abrasive cleaners or excessive water.
A straight match means that the pattern on one strip of wallpaper lines up horizontally with the pattern on the adjacent strip at the same height on the wall.
Each roll covers approximately 5.32 square meters. Measure your wall area and divide by this figure, then round up to account for pattern matching and wastage. It is crucial to order all rolls needed for the job from the same batch number.
While classified as washable, it is generally recommended for living areas, bedrooms, and hallways. For very high-moisture areas like bathrooms or kitchens, a specifically designed vinyl wallpaper with higher humidity resistance might be more suitable.
The Anaglypta Townsend Wallpaper comes with a 1-year guarantee.
Ensure the correct type of wallpaper adhesive is used for vinyl wallpapers and applied evenly. Check that the wall surface is properly prepared (clean, dry, and primed if necessary). Allow the pasted paper to 'relax' for the recommended time.
Use a wallpaper brush or smoother to gently push air bubbles towards the nearest edge. If a crease is stubborn, you may need to carefully lift the paper back to that point and re-smooth.
Apply paint in thin, even coats. Ensure the wallpaper adhesive is fully dry before painting. If the texture is very deep, a second coat of paint might be necessary for complete coverage.
Check the pattern repeat (21.5cm straight match) and ensure each strip is hung with the correct orientation and alignment. Slight adjustments can sometimes be made before the adhesive fully sets.
Setup: This is a 'Paste The Paper' wallpaper. Apply wallpaper adhesive evenly to the back of the paper and allow it to 'relax' according to the adhesive manufacturer's instructions before hanging. Ensure walls are clean, dry, and free from dust or grease. Minor imperfections and uneven surfaces are generally well-covered by this wallpaper's texture.
Compatibility: Suitable for most interior walls. The white finish is a primer, ready to accept most types of paint (emulsion, vinyl, acrylic). Always test paint on a small, inconspicuous area first.
Care: The wallpaper is classified as washable. Clean gently using a damp cloth or sponge. Avoid harsh scrubbing or abrasive cleaners, which could damage the textured finish or paint layer.
