Rapid No. 13 precision cut fine wire staples are made from high-performance galvanised steel for strength and durability. The thin wire makes the fixed staple almost invisible, ideal for craft and textiles where the staple will have minimal effect on the fibres. Type: 13 (galvanised steel). Size: 10mm leg length. Quantity: 5,000. For use with the Rapid MS610, R13, R83, R30, R33, MS813, ESN113 and R213 tackers. Precision cut 13/10mm finewire staples from Rapid, made from high-performance galvanised steel. Make light work of a range of professional and DIY stapling tasks, including the fastening of textiles and fabrics to wood, labelling and upholstery work. The thin wire makes the fixed staple very discreet. Our galvanised steel No. 13 finewire staples feature an 10mm leg length, 10.6mm breadth. Precision cut legs provide optimal material penetration, leaving 1mm holes and a minimal effect on textile fibres. Our full range of tools and staples are colour coded and marked with icons to make it easy to find the correct tool and staple combinations. Staple usage tip: 1/3 of the staple leg length should be the same as the thickness of the material you are fastening, and 2/3 of the staple leg length should penetrate the material that you are fastening to. These 10mm staples fit these Rapid tools in our range: MS610, R13, R83, R30, R33, MS813, ESN113 and R213 tackers. Contents: One pack of 5000 Rapid No.13 high-performance staples.