Shopping.co.uk

HP POLY G62 POE+ CBL KIT UK

Not AvailableHP POLY G62 POE+ CBL KIT UK

This is the HP POLY G62 POE+ CBL KIT UK, a power injector and cable kit designed for Poly Studio G...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

TP-Link PowerLine Network Adapter Kit - TL-WPA4220 KIT V4From £40View product TP-Link Powerline Extender - AV1000 Gigabit, AC1200 Wi-Fi - TL-WPA7617 (UK)From £55View product Powerline Adapter Kit - TP-Link TL-PA7017P KIT (UK)From £50View product TP-Link G.hn2400 Powerline AX1800 Wi-Fi 6 Kit - PGW2440 KIT (UK)From £130View product

Product Information

Full details

This guide is for users of the Poly Studio G62 video bar needing a reliable power and network connection. The key benefit is simplified setup and clean cable management through Power over Ethernet Plus (PoE+). A caveat is that this specific kit is designed for the UK region and requires a compatible PoE+ network switch or injector. This kit includes a 45W PoE++ adapter and a 0.23M CAT6A Ethernet cable, ensuring efficient power delivery and high-speed data transfer for your Poly Studio G62.

All features

Model Part NumberPOLYG62POE+CBLKITUK
BrandHP

Extended Product Information

FAQs

What is PoE+?

PoE+ (Power over Ethernet Plus) is a technology that allows network cables to deliver electrical power and data simultaneously to devices like the Poly Studio G62, reducing the need for separate power supplies.

Do I need a special network switch for this kit?

Yes, you need a network switch that supports PoE+ (IEEE 802.3at) or PoE++ (IEEE 802.3bt) standards to power the Poly Studio G62 through the Ethernet cable.

Can I use this kit outside of the UK?

This specific kit includes a UK power cord. While the adapter itself may function internationally with appropriate voltage, you would need to source a compatible power cord for your region.

What is the length of the included Ethernet cable?

The kit includes a 0.23-meter (approximately 0.75 feet) CAT6A Ethernet cable.

Will this kit work with older Poly Studio models?

This kit is specifically designed for the Poly Studio G62. Compatibility with other models is not guaranteed and may require different power specifications.

What is the power rating of the adapter?

The adapter supports 45W power delivery, which is sufficient for the Poly Studio G62's requirements, and it supports 2.5Gbps network speeds.

Troubleshooting

Poly Studio G62 does not power on.

Verify that the network switch or PoE injector is providing PoE+ power. Check that the Ethernet cable is securely connected to both the Poly Studio G62 and the adapter. Ensure the adapter is properly connected to the power source (if applicable, for the power cord).

No network connectivity to the Poly Studio G62.

Confirm that the Ethernet cable is functioning correctly and is not damaged. Check the network configuration of your PoE switch or injector. Try connecting the Ethernet cable directly from the switch to a laptop to test network access.

Intermittent connection or low bandwidth.

Ensure the CAT6A cable is used and properly seated. Check for any potential electromagnetic interference near the cable. Confirm that your network switch supports the required 2.5Gbps speeds.

Pros and Cons

Pros

  • Simplifies installation by reducing the number of cables needed.
  • Ensures stable power and network connection for the Poly Studio G62.
  • High-speed networking support for demanding video conferencing.
  • Clean aesthetic with a single cable solution.

Cons

  • Requires a PoE+ compatible network switch or injector.
  • Specific to the UK region; not compatible with other power outlets without an adapter.
  • Short cable length (0.23M) may limit placement options without additional Ethernet cabling.

Setup, Compatibility & Care

Setup:

  1. Connect the included CAT6A Ethernet cable to the network port on your Poly Studio G62.
  2. Connect the other end of the Ethernet cable to the provided PoE+ adapter.
  3. Connect the adapter to your PoE+ enabled network switch or a separate PoE+ injector.
  4. Connect the UK power cord to the PoE+ adapter and plug it into a wall socket.
  5. Ensure your network switch or injector is powered on and configured to provide PoE+ power.

Compatibility:

  • This kit is specifically designed for the Poly Studio G62 video bar.
  • Requires a PoE+ (802.3at) or PoE++ (802.3bt) compliant network switch or PoE injector.
  • The included power cord is for UK electrical outlets only.

Care:

  • Keep the adapter and cable away from excessive heat and moisture.
  • Clean the exterior of the adapter and cable with a dry, soft cloth. Do not use liquid cleaners.