Highlander Forces Blackthorn 1 GEN2 Tent - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Highlander Forces Blackthorn 1 GEN2 Tent is designed for solo adventurers and wild campers seeking a lightweight, stable shelter. Its key benefit is the ultralight, low-profile design that offers superior stability in variable weather, coupled with an integrated bug net for comfort. A potential caveat is its 1-person capacity, which might feel compact for those accustomed to more space. This tent features taped seams for waterproofing, a fully sewn-in groundsheet, and a side vestibule for gear storage, making it a mobile and practical choice for minimalist camping.
All features
| Colour | Green |
|---|---|
| Material | Polyester |
| Model Part Number | TEN131V2-HC |
| Brand | Highlander |
Extended Product Information
FAQs
What is the hydrostatic head rating for the flysheet and groundsheet?
The flysheet has a hydrostatic head rating of 2000mm, and the groundsheet is rated at 3000mm.
How much does the tent weigh?
The tent weighs 1.710kg, or 1.67kg when excluding the dry bag.
Can I fit two people in this tent?
This tent is specifically designed as a 1-person tent. While two very small individuals might fit, it is not recommended for comfort or space.
What are the packed dimensions?
The pack size is approximately 29cm (Length) x 14cm (Diameter).
Is the tent suitable for three-season use?
Yes, the design and materials, including the low-profile stability and bug net, make it suitable for spring, summer, and autumn camping.
How is the tent secured against wind?
The tent uses fibreglass poles, guy lines, and pegs. The low-profile design also contributes to its wind stability. Ensure all guy lines are properly tensioned and secured.
What material is the tent made from?
The flysheet is made from 190T Polyester with a 2000mm hydrostatic head, and the groundsheet is 190T Polyester with a 3000mm hydrostatic head.
Troubleshooting
Tent won't fully extend or poles are difficult to insert.
Ensure pole sections are fully connected and aligned. Check pole sleeves for any obstructions.
Condensation inside the tent.
Improve ventilation by opening vents (if present) or slightly loosening the flysheet. Ensure the inner and outer fabrics are not touching. Avoid cooking inside the tent.
Water pooling under the groundsheet.
Ensure the tent is pitched on level ground and that water drainage is not obstructed. Check the hydrostatic head rating of the groundsheet (3000mm) for its water resistance limit.
Seams appear to be leaking.
Confirm that the seams are indeed taped. If the tape is damaged or peeling, consider using a seam sealer product. The flysheet has a 2000mm hydrostatic head rating.
Stuff sack is difficult to close.
Ensure the tent is packed as compactly as possible, rolling it from the opposite end of the poles. Consider using a compression sack if space is extremely limited, though this is not included.
Pros and Cons
Pros
- Ultralight and highly portable, ideal for backpacking.
- Stable design suitable for varied weather conditions.
- Integrated bug net enhances comfort and ventilation.
- Good waterproofing with taped seams and sewn-in groundsheet.
- Includes a vestibule for convenient gear storage.
Cons
- Strictly a 1-person tent, may be too small for some users.
- Fibreglass poles are generally less durable than aluminum alternatives.
- Low-profile design might reduce headroom for some individuals.
- External dimensions might be tight for larger backpacks or extensive gear.
Setup, Compatibility & Care
Setup:
- Unpack the tent and identify the poles, flysheet, and groundsheet.
- Assemble the 6.9mm fibreglass poles and insert them into the corresponding sleeves on the flysheet.
- Secure the pole ends using the eyelet and buckle system.
- Pitch the flysheet over the poles and secure it using the guy lines and pegs.
- Ensure all guy lines are tensioned for maximum stability.
Compatibility:
This tent is designed as a standalone 1-person shelter. It is compatible with standard camping accessories such as sleeping bags and mats within its interior dimensions. It is not designed to be attached to other shelters.
Care:
- Always dry the tent thoroughly before storing to prevent mold and mildew.
- Clean the tent fabric with a damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive cleaners.
- Store the tent loosely in its stuff sack, rather than compressed, to prolong fabric and pole life.
- Regularly check the integrity of seams and re-waterproof if necessary, especially after extensive use.
- Inspect poles for damage and replace if cracked or broken.