Rangemaster 110cm Chimney Cooker Hood - Silver - B
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Rangemaster 110cm Chimney Cooker Hood is designed for modern kitchens, offering a sleek stainless steel finish and versatile ducted or recirculating installation. Its key benefit is powerful extraction up to 610 m³/h (710 m³/h on boost) to keep your kitchen air fresh. A minor caveat is the 'C' rated grease filtering efficiency.
All features
| Colour | Silver |
|---|---|
| Energy Efficiency | B |
| Model Part Number | UHDF110SS |
| Brand | Rangemaster |
Extended Product Information
FAQs
Can this hood be used in both ducted and recirculating modes?
Yes, this Rangemaster cooker hood is designed for both ducted (venting outside) and recirculating (filtering air back into the kitchen) installation.
How often should I clean the grease filters?
It is recommended to clean the metal grease filters regularly, typically once a month, or more frequently if you cook greasy foods often. They are washable for convenience.
What is the maximum extraction rate?
The maximum extraction rate is 610 m³/h, with a boost position offering up to 710 m³/h for intensive extraction.
What type of bulbs does this hood use?
This hood uses two 1W LED bulbs, which are energy-efficient and provide good illumination over the cooking area.
What is the energy efficiency rating?
The cooker hood has an energy efficiency class of 'B'.
What are the dimensions of the cooker hood?
The product dimensions are 1100 mm in width, 450 mm in depth, and the height is adjustable from 600 mm to 1060 mm.
Is the chimney height adjustable?
Yes, the chimney height is adjustable, ranging from a minimum of 60 cm to a maximum of 106 cm.
Troubleshooting
Cooker hood not turning on.
Check that the power cord is securely plugged into a working electrical outlet. Verify that the circuit breaker for the kitchen has not tripped.
Low extraction power.
Ensure the filters are clean and not clogged. If using the recirculating mode, check if the carbon filters need replacement. For ducted installations, inspect the ducting for any blockages.
Excessive noise during operation.
Confirm that the cooker hood is securely mounted to the wall. Check that all filter and casing screws are tightened. High speed settings are naturally louder.
Lights not working.
Ensure the LED bulbs are properly seated. If they are still not working, they may need to be replaced. Consult the manual for bulb replacement instructions.
Pros and Cons
Pros
- Versatile installation options (ducted or recirculating).
- High extraction rate suitable for busy kitchens.
- Clear LED lighting for improved visibility during cooking.
- Easy-to-use button controls.
- Washable filters for convenient maintenance.
- Adjustable chimney height for flexible fitting.
Cons
- Grease filtering efficiency is rated 'C'.
- Noise level can reach up to 69 dB on intensive speed.
- Requires separate ducting if opting for ducted installation.
- Boost mode air extraction power is high but may be rarely needed for standard cooking.
Setup, Compatibility & Care
Setup: This is a wall-mounted cooker hood with a chimney design. Installation requires mounting the hood to the wall and connecting it to either an external duct or a recirculating system. The chimney height is adjustable (600 mm to 1060 mm) to accommodate different ceiling heights.
Compatibility: The hood is compatible with standard AC power supply (220-240 V, 50-60 Hz). For ducted installation, ensure you have appropriate exhaust ducting with a minimum diameter of 15 cm. For recirculating, carbon filters are required (included).
Care: The metal grease filters are washable, which is essential for maintaining performance and safety. Regularly remove and clean these filters according to manufacturer instructions, typically by hand washing or in a dishwasher if specified. The exterior stainless steel surface can be cleaned with a soft, damp cloth and mild detergent. Avoid abrasive cleaners that could scratch the finish. Ensure the unit is powered off and cool before cleaning.