Nuie Core Vanity Unit and Basin - Black - 600mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Nuie Core 600mm Wall Hung Vanity Unit and Thin Edge Basin in Satin Soft Black is designed for homeowners seeking a modern, space-saving, and organized bathroom solution. Its key benefit lies in combining ample storage with a sleek, contemporary aesthetic that enhances any bathroom. A minor caveat is that the basin tap and waste are sold separately, requiring an additional purchase. This unit features a durable soft black finish, two soft-close doors for quiet operation, and a thin-edge basin with a single tap hole, perfect for a minimalist mono basin mixer tap.
All features
| Colour | Black |
|---|---|
| Model Part Number | COR1405 |
| Brand | Nuie |
Extended Product Information
FAQs
What is included with the Nuie Core Vanity Unit?
The product includes the Nuie Core Satin Soft Black 600mm Wall Hung 2 Door Vanity Unit and the Core 600mm Thin Edge Basin. Please note that the basin tap and waste are sold separately.
Can I use a standard mixer tap with this basin?
No, this basin is designed with a single tap hole, meaning it is compatible with mono basin mixer taps only.
How do I clean the soft black finish?
Clean the unit with a soft, damp cloth. Avoid using abrasive cleaners or chemicals that could damage the finish. Wipe dry after cleaning.
Is the tap included with the vanity unit?
No, the basin tap and waste are sold separately unless specifically stated otherwise in a bundle.
What are the dimensions of the vanity unit and basin?
The basin dimensions are 605mm (width) x 135mm (height) x 355mm (depth). The vanity unit dimensions are 580mm (width) x 539mm (height) x 342mm (depth).
Is this vanity unit suitable for small bathrooms?
Yes, the wall-hung design makes it ideal for smaller bathrooms as it creates a sense of space and is easy to clean underneath.
What type of waste fitting should I purchase?
You will need a standard basin waste and trap compatible with a single tap hole basin. These are sold separately.
Troubleshooting
Doors not closing smoothly
Check if anything is obstructing the doors or hinges. Ensure the unit is level. Adjust hinges if necessary.
Water leaks from basin waste
Ensure the basin waste is correctly installed and sealed. Check all connections and tighten if necessary. Replace washers if they appear worn.
Unit appears unstable on the wall
Re-check wall fixings and ensure they are suitable for the wall type and properly secured. If in doubt, consult a professional plumber or installer.
Soft-close mechanism is noisy
Ensure the doors are not misaligned or catching on anything. The soft-close mechanism is designed for quiet operation; if noise persists, contact the manufacturer.
Pros and Cons
Pros
- Modern and stylish soft black finish.
- Space-saving wall-hung design.
- Quiet and smooth soft-close doors.
- Generous storage capacity for bathroom items.
- Easy to clean due to its wall-mounted nature.
- Elegant, minimalist basin design.
Cons
- Tap and waste are sold separately.
- Requires wall mounting, necessitating appropriate fixtures.
- Limited color options available for this specific model.
- Basin has only one tap hole, limiting tap choice to mono mixers.
Setup, Compatibility & Care
Setup:
- Wall Mounting: Securely mount the vanity unit to the wall using appropriate fixings (not included) suitable for your wall type. Ensure it is level and stable.
- Basin Installation: Place the thin edge basin onto the vanity unit, ensuring it is properly seated.
- Tap & Waste Installation: Fit your chosen mono basin mixer tap (sold separately) into the single tap hole. Install a compatible basin waste (sold separately) according to manufacturer instructions.
- Plumbing Connections: Connect the tap's water supply lines and the basin waste to your bathroom's plumbing system.
Compatibility:
- This unit is designed for use with mono basin mixer taps only, due to the single tap hole in the basin.
- Requires a standard basin waste and trap (sold separately).
- Ensure your wall structure can support the weight of the vanity unit when fully loaded and mounted.
Care:
- Clean the vanity unit and basin with a soft, damp cloth. Avoid abrasive cleaners or scouring pads that could damage the finish.
- Wipe dry after cleaning to prevent water spots.
- For stubborn marks, use a mild soap solution and rinse thoroughly.
- Periodically check wall mounting fixings for security.