Rittal SV Power Rail Support - 9340460
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Rittal SV 9340.460 OM adaptor is designed for electricians and system integrators working with Rittal enclosure systems, particularly the VX25 series. Its key benefit is facilitating secure and efficient connections to busbars within bayed enclosure configurations. A primary consideration is its specific compatibility requirements regarding busbar dimensions and spacing.
All features
| Model Part Number | 9340460 |
|---|---|
| Brand | Rittal |
Extended Product Information
FAQs
What busbar dimensions is the Rittal SV 9340.460 compatible with?
It is designed for busbars with a cross-section height between 5 mm and 10 mm, and a center-to-center spacing of 60 mm.
What is the maximum current and voltage rating for this adaptor?
The adaptor is rated for 32A and 690V.
Can this adaptor be used with any enclosure system?
It is specifically designed for Rittal busbar systems, support frames, TS 55D support rails, and is ideal for Rittal VX25 Basic Enclosures. Compatibility with other systems is not guaranteed.
What size wire does the connection cable support?
The connection cable is compatible with AWG 10 wire.
What is the material of the Rittal SV 9340.460?
The adaptor is made of Polyamide.
What are the physical dimensions of the adaptor?
The dimensions are 55 mm (Width) x 208 mm (Height).
Troubleshooting
Adaptor not making proper contact with the busbar.
Verify busbar dimensions (height 5-10 mm, center-to-center 60 mm) and ensure the support frame/rail is correctly installed. Re-seat the adaptor, ensuring it is fully engaged.
Overheating at the connection point.
De-energize the system. Check for secure connection to the busbar and AWG 10 cable. Ensure the busbar is clean and free of oxidation. Confirm the connected load does not exceed the 32A rating.
Loose connection after installation.
Re-tighten the mounting mechanism according to the Rittal installation manual. Ensure all screws or fasteners are secure.
Pros and Cons
Pros
- Robust construction suitable for industrial environments.
- Designed for seamless integration with Rittal VX25 enclosure systems.
- High voltage and amperage rating (690V, 32A) for significant power handling.
- Compatible with standard AWG 10 wiring.
- Facilitates secure connections to specific busbar types.
Cons
- Limited compatibility; requires specific busbar dimensions (5-10mm height, 60mm spacing).
- Primarily designed for Rittal enclosure systems, potentially limiting use with other brands.
- Not suitable for applications outside its specified voltage and current ratings.
- Requires careful installation to ensure correct busbar engagement.
Setup, Compatibility & Care
Setup: Ensure the busbar meets the specified dimensions: a cross-section height between 5 mm and 10 mm, and a center-to-center spacing of 60 mm. Mount the adaptor securely onto the busbar according to Rittal's installation guidelines, ensuring proper contact. Connect the AWG 10 cable to the appropriate terminals.
Compatibility: This adaptor is specifically designed for Rittal busbar systems compatible with support frames and TS 55D support rails, and is primarily intended for use with Rittal VX25 Basic Enclosures. Verify busbar dimensions before installation.
Care: Keep the adaptor clean and free from dust and debris. Periodically inspect the connection points for any signs of wear or damage. Avoid exposing the adaptor to excessive moisture or corrosive environments. Cleaning can be done with a dry or slightly damp cloth; ensure the system is de-energized before any maintenance.