Integral LED Square Evofire IP65 Fire Rated Downlight Satin in Nickel
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and contractors looking to install the Integral LED Square Evofire IP65 Fire Rated Downlight. The key benefit is its fire protection and open rating, allowing for better airflow and compatibility with various building regulations. However, please note that the GU10 lamps are not included and need to be purchased separately. This guide will help you understand the features, setup, and maintenance of this downlight.
All features
| Colour | White |
|---|---|
| Brand | Integral LED |
Extended Product Information
FAQs
What type of lamps can I use?
You can use GU10 LED lamps with a maximum of 10W. The lamps are not included.
Is this downlight fire-rated?
Yes, it is fire-rated, offering complete fire protection and complying with various building regulations.
What is the cutout size?
The cutout size required is 70mm.
Can I use this downlight with a dimmer?
Yes, but ensure the GU10 lamp you use is dimmable and that the dimmer switch is compatible with LED lamps.
What materials can this downlight be installed in?
It is suitable for Solid Timber (30-60-90min) and I-Joist (30-60min).
Is the downlight suitable for bathrooms?
The IP65 rating suggests suitability; however, always consult local regulations and electrical codes for bathroom installations to ensure compliance.
Where can I purchase replacement lamps?
Replacement GU10 LED lamps can be purchased from most electrical suppliers and online retailers.
Troubleshooting
Downlight doesn't turn on.
Check the GU10 lamp is correctly installed and that the power supply is connected. Check circuit breaker.
Lamp flickers or dims.
Ensure the LED lamp is compatible with the downlight and is properly seated. If using a dimmer, verify the dimmer compatibility.
Downlight is too hot.
Ensure the correct wattage LED lamp is used (max 10W). Check for any obstructions blocking airflow.
Pros and Cons
Pros
- Fire-rated for enhanced safety.
- Open rated design extends LED lamp life.
- Easy to install with push-fit terminals.
- Sleek, modern design with an ultra-thin bezel.
- Complies with various building regulations.
Cons
- GU10 lamps are not included and must be purchased separately.
- Requires compatible GU10 LED lamps (max 10W).
- May require professional installation depending on your experience.
- Limited to specific GU10 lamp types.
- IP65 rating might not be necessary for all indoor applications.
Setup, Compatibility & Care
- Installation:
- Ensure the power is turned off before starting.
- Cut a 70mm hole for the downlight.
- Connect the wiring using the screwless push-fit terminals.
- Insert the downlight into the hole.
- Compatibility:
- Compatible with GU10 LED lamps only (max 10W).
- Suitable for Solid Timber (30-60-90min) and I-Joist (30-60min) applications.
- Complies with Building Regulations parts B, C, E, and L.
- Care:
- Clean with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive cleaners.
- Regularly check for any signs of damage.