PLANET VC-231 network media converter - 100 Mbit/s - Black - VC-231
Not Available
PLANET VC-231 network media converter 100 Mbit/s Black. This is a 100/100 Mbps Ethernet to VDSL2 C...PLANET VC-231 network media converter 100 Mbit/s Black. This is a 100/100 Mbps Ethernet to VDSL2 Converter with a 30a profile, offering high performance Ethernet over VDSL2. It provides symmetric data rates of up to 100/100Mbps within 300m and 50/2Mbps for connections up to 1.4km using existing copper telephone lines. The VC-231 includes one RJ-45 Ethernet port and one RJ-11 phone jack for VDSL2 connection. A POTS splitter is included to allow sharing the telephone line with POTS. This converter is ideal for extending Ethernet networks and supporting triple play services like VOD, VoIP, Video phone, and IPTV. It features a plug-and-play design, diagnostic LEDs, and can be configured in either CPE or CO mode via a DIP switch for point-to-point connections. The device offers superior upstream and downstream transmission performance, with specific band plan operations for short-range (profile 30a) and long-distance (profile 17a) transmissions.
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
This guide is for users looking to extend their Ethernet network using existing copper telephone lines with the PLANET VC-231. It provides a reliable solution for transmitting data at speeds up to 100 Mbps over distances up to 1.4km. Note that performance can be affected by the quality and length of the existing telephone lines.
All features
Model Part Number
VC-231
Brand
Planet
Extended Product Information
FAQs
What is the maximum distance the VC-231 can transmit data?
The VC-231 can transmit data up to 1.4km, but the actual distance depends on the quality of the copper telephone lines.
What is the difference between CPE and CO modes?
CPE (Customer Premises Equipment) mode is used at the customer's location, while CO (Central Office) mode is used at the central site.
Does the VC-231 support Gigabit Ethernet?
No, the VC-231 supports Fast Ethernet with a maximum data transfer rate of 100 Mbps.
Can I use the telephone line for voice calls while using the VC-231?
Yes, the included POTS splitter allows you to share the telephone line for both data transmission and voice calls.
What type of cables does the VC-231 use?
It uses standard RJ-45 Ethernet cables for the network connection and RJ-11 cables for the VDSL2 connection.
How do I reset the VC-231 to factory settings?
The VC-231 does not have a reset button. There are no factory reset settings.
What is the warranty period for the PLANET VC-231?
The warranty information is not available in the provided product description, please consult your retailer or the manufacturer for warranty details.
Troubleshooting
No link light on the Ethernet port
Check the Ethernet cable connection and ensure the connected device is powered on. Verify the DIP switch settings for CPE/CO mode.
Slow data transfer speeds
Check the length and quality of the telephone line. Ensure there are no other devices interfering with the signal. Try reducing the distance between the two VC-231 units.
Device is not powering on
Check the power adapter and the power outlet. Ensure the power adapter is securely connected to the VC-231.
Unable to connect to the internet
Verify the configuration of the connected device. Check the settings of the VC-231, and ensure the CPE and CO modes are set correctly on each end.
Pros and Cons
Pros
Extends Ethernet networks over existing phone lines, reducing infrastructure costs.
Supports high-speed data transfer rates, suitable for bandwidth-intensive applications.
Easy to set up and configure with a plug-and-play design.
Includes a POTS splitter for convenient telephone line sharing.
Provides diagnostic LEDs for easy monitoring of network status.
Offers flexible deployment options with CPE/CO mode selection.
Cons
Performance is dependent on the quality and length of the existing copper lines.
Requires a pair of VC-231 units for point-to-point connections.
Maximum data transfer rates may vary based on distance.
Not suitable for applications requiring Gigabit Ethernet speeds.
Limited to a single Ethernet port.
Setup, Compatibility & Care
Connecting the Hardware:
Connect the RJ-45 Ethernet cable from your device (computer, switch, etc.) to the Ethernet port on the VC-231.
Connect the RJ-11 cable to the phone jack on the VC-231 and to the telephone line.
If you intend to use the phone line for voice calls, use the included POTS splitter to connect your phone.
Connect the power adapter to the VC-231 and plug it into a power outlet.
Configuration:
Determine the operational mode: CPE (Customer Premises Equipment) or CO (Central Office). The CO mode is typically used at the central site, while CPE mode is used at the customer site. For a point-to-point connection, you will need one VC-231 set to CPE mode and another set to CO mode.
Use the DIP switch on the device to select the appropriate mode.
Compatibility:
The VC-231 is compatible with IEEE 802.3, IEEE 802.3u, and IEEE 802.3x networking standards.
Ensure that the devices you are connecting to the VC-231 are also compatible with these standards.
Care:
Ensure the device is installed in a well-ventilated area to prevent overheating.
Avoid exposing the device to extreme temperatures or humidity.
Use a soft, dry cloth to clean the device. Do not use liquid cleaners.
Regularly check the LED indicators for any unusual activity that may indicate a problem.
TP-Link PowerLine Network Adapter Kit - TL-WPA4220 KIT V4From £40View product 
TP-Link Powerline Extender - AV1000 Gigabit, AC1200 Wi-Fi - TL-WPA7617 (UK)From £55View product 
Powerline Adapter Kit - TP-Link TL-PA7017P KIT (UK)From £50View product 
TP-Link G.hn2400 Powerline AX1800 Wi-Fi 6 Kit - PGW2440 KIT (UK)From £130View product