Dulux Trade Ultra Matt - White - 3L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Dulux Trade Ultra Matt in White (3L) is designed for decorators seeking a professional, non-reflective finish, particularly for ceilings and areas with critical lighting. Its key benefit is an almost invisible touch-up capability, minimizing the appearance of marks. A potential caveat is the need for specific primer on new or bare surfaces. This water-based emulsion offers excellent coverage and a dead matt finish, ensuring a uniform look across large areas.
All features
| Colour | White |
|---|---|
| Model Part Number | 5905368 |
| Brand | Dulux Trade |
Extended Product Information
FAQs
What is the coverage rate of Dulux Trade Ultra Matt?
Dulux Trade Ultra Matt provides good coverage of up to 16m² per litre.
Can I use this paint on exterior walls?
No, this product is specifically formulated for interior use only and is not suitable for exterior applications.
How long does it take for the paint to be recoatable?
The paint is recoatable within 4 hours, allowing for efficient application of multiple coats.
What is the main advantage of the 'ultra matt' finish?
The ultra matt finish is non-reflective and provides excellent touching-in properties, meaning touch-ups are almost invisible, which is ideal for areas with critical lighting.
Do I need a special primer for this paint?
Yes, for new or bare surfaces, it is recommended to first coat with Dulux Trade Drywall Primer Sealer. For previously painted surfaces in good condition, a mist coat may suffice.
How should I clean my brushes and rollers after use?
Clean all tools and equipment immediately after use with water.
Is this paint suitable for bathrooms?
While it can be used on ceilings in areas where condensation is not extreme, it is not specifically formulated for high-moisture environments like shower areas or steamy bathrooms. For such areas, a specific kitchen and bathroom paint would be more appropriate.
Troubleshooting
Paint appears patchy or uneven after drying
This is often due to uneven application or insufficient coats. Ensure a wet edge is maintained during application and apply the recommended 2-3 coats. Check that the surface was properly primed if it was new or bare.
Touch-ups are still visible
Ensure the touch-up area is clean and dry. Apply a small amount of paint using a fine brush, feathering the edges outwards. Allow to dry completely before assessing. Over-application or using too much paint for the touch-up can make it more noticeable.
Paint is not adhering well
The surface may not have been adequately prepared. Ensure it is clean, dry, and free from dust or contaminants. If applying to a new or bare surface, confirm that Dulux Trade Drywall Primer Sealer was used.
Excessive sheen or 'flashing' is visible
Ensure the paint is applied evenly and consistently, especially on large areas like ceilings. Avoid over-working the paint and maintain a wet edge. Check that the correct primer was used on new surfaces.
Pros and Cons
Pros
- Achieves a true, non-reflective dead matt finish.
- Superior performance for touch-ups, minimizing visible repairs.
- Reduces the likelihood of flashing, ensuring a consistent look.
- High coverage rate makes it economical for large areas.
- Suitable for professional use in demanding lighting conditions.
Cons
- Requires a specific primer (Dulux Trade Drywall Primer Sealer) on new or bare surfaces.
- Ultra matt finish can be unforgiving of surface imperfections before application.
- Recoat time of 4 hours requires planning for multi-coat jobs.
- Primarily intended for interior use; not suitable for high-moisture environments like bathrooms without appropriate preparation.
Setup, Compatibility & Care
Surface Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and old wallpaper. For new or bare plaster, drywall, or previously painted surfaces that have been sanded, apply one coat of Dulux Trade Drywall Primer Sealer. For previously painted surfaces in good condition, a mist coat of Dulux Trade Ultra Matt diluted with 10% clean water may be sufficient.
Application: Stir the paint thoroughly before use. Apply 2-3 coats using a brush, roller, or spray for best results. Maintain a wet edge during application to avoid lap marks. Allow 4 hours between coats.
Compatibility: This is a water-based emulsion and is compatible with most standard interior masonry and plaster surfaces when properly primed. Not recommended for exterior use or areas of high condensation.
Care: Clean tools and equipment immediately after use with water. To clean painted surfaces, use a soft cloth dampened with water. Avoid abrasive cleaners or excessive scrubbing, as this may affect the matt finish.