Everbuild Anchorset Green 300 - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users understand and effectively use the Everbuild Anchorset Green 300, a high-strength, styrene-free chemical anchoring system. Ideal for securing heavy loads like railings and satellite dishes, it offers rapid curing and easy application. Note that it's not suitable for non-porous surfaces or wet conditions.
All features
| Colour | Green |
|---|---|
| Model Part Number | ANCHGREEN |
| Brand | Everbuild |
Extended Product Information
FAQs
What is the shelf life of Everbuild Anchorset Green 300?
Check the expiration date printed on the cartridge. Using the product within its shelf life is crucial for proper performance.
Can I use this product on wet surfaces?
No, Everbuild Anchorset Green 300 is not suitable for use on wet surfaces. The surface must be completely dry.
What type of sealant gun do I need?
You need a standard sealant gun, also known as a cartridge gun.
Is Everbuild Anchorset Green 300 suitable for overhead applications?
Yes, it is suitable for overhead applications provided the substrate is appropriate and the installation follows the manufacturer's guidelines.
What are the key advantages of using a styrene-free product?
Styrene-free products have a lower odor, making them more pleasant to work with, especially in enclosed spaces.
What materials can I use this product with?
This product works well with a wide variety of building substrates, including concrete, brick, and stone. Do not use with metal or PVC.
What is the cure time for Everbuild Anchorset Green 300?
Cure times vary based on temperature. Always refer to the product data sheet for specific information. Generally, it cures quickly, allowing for rapid project completion.
Troubleshooting
Anchor not setting/curing properly.
Ensure the product is within its expiration date, the mixing nozzle is properly attached, and the substrate is clean and dry. Check the ambient temperature, as very cold conditions may slow curing.
Difficulty dispensing the product.
Ensure you are using a standard sealant gun and that the plunger is engaging the cartridge correctly. If the product is very cold, warm it slightly before use.
Fixing not holding the load.
Check if the correct hole size and depth were used according to the product instructions. Ensure the product has fully cured before applying the load. The substrate might be unsuitable or damaged.
Pros and Cons
Pros
- High load-bearing capacity.
- Quick and easy application.
- Low odor formulation.
- Compatible with standard sealant guns.
- Rapid curing for reduced downtime.
- Versatile use in various applications
Cons
- Not suitable for non-porous materials (metal, PVC).
- Cannot be used on wet surfaces.
- Requires a standard sealant gun for application.
- Specific application instructions must be followed to achieve the best results.
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean, dry, and free of debris.
- Cartridge Insertion: Place the Everbuild Anchorset Green 300 cartridge into a standard sealant gun.
- Nozzle Attachment: Attach the provided mixer nozzle to the cartridge.
- Dispensing: Squeeze the sealant gun trigger to dispense the mixed product into the hole.
- Insertion: Insert the fixing (bolt, stud, etc.) into the hole.
- Curing: Allow the product to cure completely according to the manufacturer's instructions before applying any load.
Compatibility:
- Suitable for use with a wide range of building substrates, including concrete, brick, and stone.
- Not compatible with non-porous materials such as metal and PVC, or wet surfaces.
Care:
- Store cartridges in a cool, dry place.
- Use the product before the expiration date printed on the cartridge.
- Dispose of used cartridges responsibly.