V-TUF V3-240 X2 DIY Portable Electric Pressure Washer - 150Bar

The V3 240 X2 is a powerful, compact, and lightweight 150 Bar pressure washer, ideal for cleaning ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Product Information

Full details

The V-TUF V3-240 X2 is a compact and lightweight 150 Bar electric pressure washer designed for homeowners needing effective outdoor cleaning. Its key benefit is versatility, handling tasks from delicate car washes to stubborn patio grime with various included attachments. A minor caveat is its reliance on a good water supply for optimal performance.

All features

Model Part NumberV3-240 X2
BrandV-TUF

Extended Product Information

FAQs

What is the maximum pressure output of the V3-240 X2?

The V-TUF V3-240 X2 boasts a maximum pressure of 150 Bar (approximately 2175 PSI).

What accessories are included in the Jet Wash Kit?

The Jet Wash Kit typically includes a VTC620-5L Vehicle Wash & Wax, a VDG5L V-TUF D-Green concentrate, and a V-TUF tufBRUSH Car Wash Brush.

Can I use this pressure washer to clean my car?

Yes, the V3-240 X2 is suitable for car cleaning. It includes specific attachments like a foam cannon and car wash brush, and the pressure can be adjusted for delicate paintwork using different nozzles.

How does the Total Stop System work?

The Total Stop System automatically cuts power to the motor when you release the trigger on the gun. This conserves energy and reduces wear on the pump when the machine is not actively spraying.

What is the length of the high-pressure hose and power cable?

The unit comes with an 8-meter high-pressure hose and a 5-meter power cable.

Can the V3-240 X2 draw water from a bucket?

Yes, the pressure washer features a self-priming pump, allowing it to draw water from static sources like a water butt or bucket, provided the inlet hose is submerged.

How do I apply cleaning solutions with this machine?

The V3-240 X2 has an integrated chemical tank. You can fill this with your chosen detergent and apply it using the dedicated chemical application nozzle or foam cannon.

Troubleshooting

Pressure washer does not turn on

Check that the power cable is securely plugged into a working 13amp outlet. Ensure the main power switch on the unit is in the 'ON' position.

Low water pressure

Verify the water supply is fully turned on and the inlet hose is not kinked or restricted. Clean the water inlet filter. Ensure the correct nozzle is attached and is not blocked.

Pump is running but no water is being drawn

Check if the self-priming function is engaged. Ensure the inlet hose is fully submerged in the water source. Bleed air from the system by running the unit briefly with the trigger pulled and no nozzle attached (use caution).

Detergent is not being dispensed

Ensure the chemical tank is filled and the correct chemical application nozzle is attached. Check that the detergent tube is submerged in the fluid and not blocked. Some nozzles only dispense detergent at lower pressures.

Total Stop System not working

The Total Stop System engages when the trigger is released. If the motor continues to run, there may be an issue with the trigger gun or the system itself. Contact customer support if the issue persists.

Pros and Cons

Pros

  • Versatile cleaning with multiple included nozzles and accessories.
  • Compact and lightweight design for easy portability.
  • Integrated chemical tank for convenient detergent application.
  • Total Stop System for energy efficiency and extended pump life.
  • Suitable for various surfaces, from delicate paintwork to stubborn grime.

Cons

  • Requires a good water supply for optimal pressure output.
  • Cord and hose lengths (8m high-pressure hose, 5m cable) may limit reach for larger areas.
  • Effectiveness of D-GREEN moss/algae prevention may vary based on environmental conditions.

Setup, Compatibility & Care

Setup:

  1. Connect the water inlet hose to a suitable water source.
  2. Ensure the water source is turned on and the hose is free of kinks.
  3. Attach the desired Quick Release (QR) nozzle to the lance.
  4. Plug the unit into a standard 13amp power outlet.
  5. The unit features a self-priming pump; if drawing from a static source, ensure the inlet hose is submerged.

Compatibility:

  • The V3-240 X2 uses a Quick Release (QR) system for its nozzles and accessories. Ensure any third-party accessories are compatible with this system.
  • Requires a standard 13amp power outlet.

Care:

  • After use, flush the system with clean water to remove any detergent residue.
  • Store the unit in a dry place.
  • Regularly check and clean the water inlet filter to prevent blockages.
  • Wipe down the exterior with a damp cloth as needed.