Daler Rowney Perfic Colourless Fixative Spray - Low Odour - 150ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for artists using charcoal and pastels who want to protect their work from smudging. The Daler Rowney Perfix Colourless Pastel Fixative Spray is designed to fix your artwork, preventing smudging and allowing you to layer more work on top. Keep in mind that while it offers excellent protection, over-application may slightly alter the tones and colors.
All features
| Model Part Number | 114 170 000 |
|---|---|
| Brand | Daler-Rowney |
Extended Product Information
FAQs
How far away should I hold the can when spraying?
Hold the can approximately 12 inches (30cm) away from your artwork.
Can I use this fixative on other media besides pastels and charcoal?
While primarily designed for pastels and charcoal, it *may* work on other dry media. Always test on a sample first.
How do I clean a clogged nozzle?
Remove the nozzle and soak it in warm water. You can also use a pin to gently clear any blockages.
How long does it take for the fixative to dry?
The fixative dries quickly, usually within a few minutes, depending on the coat thickness and environmental conditions.
What should I do if the fixative causes a "bloom" or whitish appearance on my artwork?
Apply a lighter coat next time and ensure even distribution. Make sure the environmental conditions are suitable (not too humid). Test on a separate sheet of paper.
Is the fixative permanent?
The fixative provides a protective layer, but the longevity of the artwork also depends on the quality of the paper and storage conditions. Store finished artwork in a stable environment, away from direct sunlight.
Troubleshooting
Fixative causing color change or "bloom".
Apply a lighter coat and ensure the spray is evenly distributed. Check the humidity levels in the environment; high humidity can sometimes cause a bloom effect. Test on a sample piece first.
Nozzle clogging.
Clean the nozzle after each use. Hold the can upside down and spray for a few seconds after use to clear the nozzle. If clogged, try soaking the nozzle in warm water.
Fixative not drying properly.
Ensure adequate ventilation. Check the surrounding temperature; drying is affected by both. Apply a thinner coat.
Pros and Cons
Pros
- Protects artwork from smudging.
- Dries quickly, saving time.
- Allows for layering of media.
- Minimizes color alteration.
- Has a low odor.
- Water-resistant properties provide added protection.
Cons
- Over-application may slightly affect colors.
- Requires proper ventilation during use.
- May not be suitable for all types of paper.
- Can be sensitive to humidity during application.
Setup, Compatibility & Care
- Preparation: Ensure you're in a well-ventilated area. Protect your work surface.
- Application: Hold the can approximately 12 inches (30cm) from the artwork and spray in even strokes.
- Drying: Allow the fixative to dry completely before handling or storing the artwork.
- Compatibility: This fixative is designed for use with charcoal and pastels but may also be suitable for other dry media. Test on a sample area first.
- Care: Store in a cool, dry place. Avoid extreme temperatures. Keep the nozzle clean to prevent clogging. Replace the cap after use.