Fix Grout Tile Adhesive is a premium grade adhesive formulated to be used as both an adhesive and grout. The product contains a fungicide to prevent mould growth and dries to a brilliant white finish. Tested to EN12004 type D2T. 750g Tub. Benefits: Excellent water resistance. Extremely high bond strength - over double the B.S. minimum requirement in wet shear (7 days drying, 7 days water immersion followed by shearing whilst wet). Compressible - allows for slight thermal movement. Dries brilliant white. Contains a fungicide - prevents mould growth. Ready mixed formula - no mixing, no mess. Apply straight from the tub. Easier to apply than most competitive adhesives. Extended open time. Areas for Use: Kitchen/Bathroom walls. Shower areas. Communal and power showers. Work tops subject to water contact. Limitations: Unsuitable for floors. Do not use for swimming pools. Use EVERBUILD 705 RAPID SET TILE MORTAR. Do not use externally. Use EVERBUILD 705 RAPID SET TILE MORTAR. When used as a grout, allow to dry for 7 days before using showers/baths. Surface Preparation: PLASTER: New plaster must be a minimum of 4 weeks old before tiling. Tile onto finishing coat only. Prime with EVERBUILD PVA diluted 1:3 with water. PLASTERBOARD/PLYWOOD/CHIPBOARD: Must be braced with seasoned timber at 300mm vertically and horizontally. Use moisture resistant grades. All surfaces and edges must be sealed with EVERBUILD SBR diluted 1:4 with water. SAND/CEMENT RENDER: Allow at least four weeks drying before tiling. Use a mix design of 3 to 4 parts sand to 1 part cement. Prime with EVERBUILD PVA. BRICKWORK/BLOCKWORK/CONCRETE BLOCK: Allow at least 4 weeks drying time before rendering or plastering. Do not fix directly to blockwork. EXISTING GLAZED TILES/FORMI: Roughen surfaces with abrasive sander and prime with EVERBUILD PVA diluted 1:1 with water. Apply adhesive whilst still tacky. Allow at least 5 days before grouting. PAINTED SURFACES.