F.Ball & Co F41 Professional Carpet Tile Tackifier Adhesive - 5Ltr - Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
F.Ball & Co F41 is a professional-grade, solvent-free tackifier designed for floor fitters and DIY enthusiasts who need to secure carpet tiles without permanent bonding. It creates a permanently tacky film that keeps loose-lay tiles from shifting under standard foot traffic while allowing for easy individual tile removal and replacement. While it offers excellent versatility for various backings and subfloors, users should note that the final coverage rate is highly dependent on the porosity of the subfloor and the texture of the carpet tile backing.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | BALL-F41-5LTR |
| Brand | F.Ball & Co |
Extended Product Information
FAQs
Is this adhesive permanent?
No, it is a tackifier designed to hold tiles in place while remaining removable for maintenance or replacement.
Can I use F41 on raised metal floors?
Yes, F41 contains rust inhibitors specifically to make it safe for use on metallic subfloors.
How long does it take to dry?
Under normal conditions, it typically dries to a tacky, clear finish in about 20 minutes when applied with a roller.
Is it compatible with underfloor heating?
Yes, the formula is resistant to plasticiser migration and is suitable for use over underfloor heating systems.
What tools are needed for application?
A standard short-pile paint roller is recommended for best results.
Does it work with all carpet tile backings?
It is compatible with most standard backings including bitumen, felt, and PVC.
Troubleshooting
Tiles are still shifting after installation
Check if the adhesive has dried sufficiently before laying tiles or ensure the application rate is heavy enough for the specific tile backing.
Adhesive is not becoming tacky
Ensure the ambient temperature is suitable for application and verify that the subfloor is not too cold or damp, which can delay the drying process.
Unexpectedly low coverage per litre
Highly absorbent subfloors soak up more adhesive; consider applying a suitable primer to the subfloor before using the F41 tackifier.
Pros and Cons
Pros
- Allows for easy removal and replacement of individual tiles
- Safe for use on metallic subfloors due to rust inhibitors
- Quick 20-minute drying time increases efficiency
- Highly resistant to plasticiser migration
- Compatible with underfloor heating systems
Cons
- Coverage varies significantly based on subfloor porosity
- Not intended for permanent or heavy-duty bonding
- Requires proper roller application for best results
Setup, Compatibility & Care
Before application, ensure the subfloor is clean, dry, and free from dust, oil, or grease. If the subfloor is highly porous, it may require a primer before applying the F41 tackifier. Apply the product using a short-pile roller, ensuring an even distribution to avoid puddling. The adhesive is compatible with most bitumen, felt, and polymer-backed carpet tiles. For routine care, the adhesive does not require specialized maintenance once the tiles are laid; however, avoid saturating the floor with water during routine cleaning, as this can affect the adhesive bond over time. Always store the container in a cool, dry place and ensure the lid is sealed tightly to prevent the product from drying out.