Be Modern Edana Electric Fire - Chrome
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is designed for anyone who owns or is considering the Be Modern Edana Electric Fire in Chrome. It offers an easy-to-use, stylish heating solution, providing an ultra-realistic flame effect and a cozy glow. This fire is best suited for 16" cutouts. Please note that while the fire is designed for energy efficiency, it requires an electrical outlet for operation.
All features
| Brand | Be Modern |
|---|
Extended Product Information
FAQs
What are the dimensions of the Edana Electric Fire?
The Edana is designed to fit a standard 16" cutout.
How do I operate the fire?
You can operate the fire using either the 7-day programmable remote control or the manual controls located on the unit.
What type of light source does the Edana use?
The Edana uses energy-efficient LED technology for its flame effect, providing a long-lasting and low-energy consumption.
How do I install the fire?
The fire is designed to fit into a 16" cutout. Simply place it within the cutout and attach the magnetic fret. Ensure that there is a power outlet nearby to plug in the fire.
How do I clean the fire?
Use a soft, dry cloth to clean the exterior of the fire. Gently dust the coal bed and clean the flame effect area as needed.
What is the warranty period for the Edana Electric Fire?
Warranty information is not available in the provided product details.
Can I control the fire's settings from the unit?
Yes, the Edana comes with manual controls on the unit for easy operation, in addition to the remote control.
What should I do if the fire is not working?
Check the power supply, ensure the unit is plugged in, and verify the settings via remote or manual controls. Refer to the troubleshooting section for more detailed solutions.
Troubleshooting
The fire does not turn on.
Check if the fire is properly plugged into the electrical outlet. Ensure the outlet is functioning correctly. Check the batteries in the remote control and replace them if needed. Also, check the manual controls on the fire itself.
The flame effect is not working.
Ensure the power is on. Check if the flame effect setting is activated using the remote or manual controls. Clean the flame effect area of any dust or debris.
The remote control is not working.
Replace the batteries in the remote control. Make sure there are no obstructions between the remote and the fire's receiver. Try using the manual controls on the fire.
The fire is not producing heat.
Ensure the heat setting is turned on using either the remote or the manual controls. Check the thermostat setting and increase it if necessary. Allow some time for the fire to warm up the room.
Pros and Cons
Pros
- Realistic flame effect enhances the ambiance of any room.
- Easy to operate with both remote and manual controls.
- Energy-efficient LED technology reduces running costs.
- Simple installation with the magnetic fret.
- Programmable remote provides flexible scheduling options.
- Stylish chrome finish complements various interior designs.
Cons
- Requires a 16" cutout for installation, which may limit placement options.
- Requires an electrical outlet for operation.
- May not provide sufficient heat for very large rooms.
- Remote control batteries need replacement.
Setup, Compatibility & Care
Setup:
- Ensure the fire is compatible with a 16" cutout.
- Carefully remove the fire from its packaging.
- Position the fire within the cutout.
- Attach the magnetic fret.
- Plug the fire into a standard electrical outlet.
Compatibility:
The Be Modern Edana Electric Fire is compatible with standard UK mains voltage (230V). Ensure your electrical outlet is properly grounded. This fire is specifically designed for 16" cutouts.
Care:
- Cleaning: Use a soft, dry cloth to clean the exterior. Avoid abrasive cleaners.
- Flame Effect: Regularly check the flame effect for any dust accumulation, cleaning gently with a soft brush.
- Coal Bed: Gently dust the coal bed to maintain its appearance.
- Remote Control: Replace the batteries in the remote control when necessary. Use appropriate battery type and dispose of them responsibly.