Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Phoenix Contact M12 SPEEDCON connector (1523434) is designed for industrial automation professionals needing reliable front-mounting sensor and actuator connections. Its key benefit is the secure and quick SPEEDCON locking mechanism, ensuring robust connections in demanding environments. A minor caveat is the fixed cable length of 0.5m, which may require specific installation planning. Key features include A-coding, 4-position straight female configuration, M16 mounting thread, and an integrated 0.5m TPE cable.
| Model Part Number | 1523434 |
|---|---|
| Brand | Phoenix Contact |
M12 refers to the standard size and thread of the connector shell. SPEEDCON is Phoenix Contact's proprietary technology that allows for quick, tool-free locking and unlocking, significantly reducing assembly time compared to traditional screw-on M12 connectors.
A-coding is the most common type for M12 connectors and is typically used for standard sensor (input) and actuator (output) signals. It ensures that connectors are properly oriented and prevents incorrect mating with connectors of different coding (like B, C, or D).
An IP67 rating means the connector is dust-tight and protected against immersion in water up to 1 meter for 30 minutes. This makes it suitable for many industrial environments.
Yes, you can extend the cable using appropriate M12 extension cables or by splicing additional wire, provided the connections are made securely and protected to maintain the required environmental rating (e.g., IP67).
This specific connector has a maximum current rating of 4 A and a maximum voltage rating of 250 V.
Ensure the mounting panel has a precise M16 x 1.5 threaded hole. Secure the connector firmly from the rear using the provided mounting thread, applying appropriate torque to create a stable connection without damaging the components.
No, the TPE cable is integrated into this specific device (SACC-E-FS-4 #1523434) and is not designed to be replaced. If the cable is damaged, the entire connector assembly typically needs replacement.
Verify that both the male and female M12 connectors are fully engaged and locked. Check that the wiring on both ends is correct and secure. Ensure the connected device and the control system are powered and functioning correctly.
Inspect the connector and cable for any signs of damage. Ensure the SPEEDCON locking mechanism is fully secured. Check the integrity of the individual wire connections within the connector housing and at the terminal points.
Confirm that the panel cutout matches the M16 x 1.5 mounting thread specification of the connector. Ensure no obstructions are present in the mounting hole.
Inspect the connector seal and the mating connection for damage. Ensure the connector is properly seated and secured. If damage is found, replace the connector.
Setup:
Compatibility:
Care:
