Rewireable Connector Plug - SPARES2GO - Universal
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the SPARES2GO Rewireable Connector Plug, designed to replace damaged power cables on lawnmowers. The key benefit is the ability to easily repair your lawnmower's power lead without replacing the entire unit, saving you time and money. Note that this plug is designed for lawnmowers with a maximum input of 10A / 250V~.
All features
| Model Part Number | Universal |
|---|---|
| Brand | SPARES2GO |
Extended Product Information
FAQs
What is the maximum current and voltage this plug can handle?
The plug is rated for a maximum of 10A and 250V~.
Which lawnmower models is this plug compatible with?
It is compatible with Bosch Rotak Ergoflex 34 34R 36 36R 370 40 43 430 models, among others. Always check your lawnmower's specifications for compatibility.
Do I need any special tools to install this plug?
You will need a wire stripper and a screwdriver to install the plug. A multimeter can be useful for checking the connections.
Is this plug waterproof?
The plug has a hinged cover for protection, but it's not fully waterproof. Avoid using it in wet conditions.
Can I use this plug for other electrical appliances?
This plug is primarily designed for lawnmowers. Its suitability for other appliances depends on their power requirements and the plug's specifications.
What does BS6991: 1990 compliance mean?
BS6991: 1990 is a British Standard that ensures the plug meets safety and quality requirements.
How do I know if the wiring is correct?
Ensure the wires are connected to the correct terminals (Live, Neutral, and Earth) inside the plug. The colors of the wires should match the existing wiring or the standard wiring color codes.
Troubleshooting
Lawnmower not turning on after rewiring
Check the wiring connections inside the plug. Ensure the wires are securely connected to the terminals and that the polarity is correct. Check the fuse within the lawnmower itself.
Plug feels loose or unstable
Ensure the hinged cover is securely closed. Check that the cable clamp inside the plug is holding the cable firmly.
Sparks or unusual sounds coming from the plug
Immediately disconnect the lawnmower from the power supply. Inspect the wiring for any loose connections or exposed wires. Replace the plug if necessary.
Pros and Cons
Pros
- Easy to repair damaged power cables.
- Cost-effective alternative to replacing the entire power lead.
- Compliant with BS6991: 1990 safety standards.
- Durable brass electrical connectors.
- Hinged cover for protection when not in use.
- Universal design suitable for multiple lawnmower models.
Cons
- Requires some basic electrical wiring knowledge.
- Not suitable for lawnmowers exceeding 10A / 250V~.
- May require stripping of the existing cable.
- Compatibility limited to certain lawnmower models.
Setup, Compatibility & Care
Setup:
- Disconnect the lawnmower from the power supply.
- Cut the damaged section of the power cable.
- Strip the insulation from the wires.
- Connect the wires to the terminals inside the plug, ensuring correct polarity.
- Close and secure the hinged cover.
Compatibility:
This plug is compatible with various lawnmower models, including Bosch Rotak Ergoflex 34 34R 36 36R 370 40 43 430. It's designed for lawnmowers with a maximum input of 10A / 250V~. Always check your lawnmower's specifications to ensure compatibility.
Care:
Ensure the plug is kept dry and clean. Regularly inspect the cable and plug for any signs of damage. If the plug shows signs of wear or damage, replace it immediately. Always handle the plug and cable with care to prevent damage.