Integral LED Square Evofire IP65 Fire Rated Downlight with Insulation Guard - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and contractors looking to install the Integral LED Square Evofire IP65 Fire Rated Downlight. The key benefit is its fire-rated design, ensuring safety and compliance with building regulations. However, please note that LED GU10 lamps are not included and must be purchased separately. This downlight offers a sleek, efficient lighting solution with enhanced longevity.
All features
| Colour | White |
|---|---|
| Brand | Integral LED |
Extended Product Information
FAQs
What type of lamps are compatible?
The downlight is compatible with LED GU10 lamps up to 10W.
Are the lamps included?
No, the LED GU10 lamps are not included and must be purchased separately.
What is the fire rating?
The downlight is fire-rated to 30, 60, and 90 minutes, complying with BS476 Part 21:1987.
Is this downlight suitable for bathrooms?
Yes, it is IP65 rated, making it suitable for use in bathrooms and other areas with moisture and dust.
How do I install the downlight?
You will need to create a 70mm cutout in the ceiling, connect the wiring to the screwless terminals, insert the LED GU10 lamp, and push the downlight into the cutout.
Can I use dimmable lamps?
Yes, you can use dimmable LED GU10 lamps.
What is the warranty?
Refer to the product packaging or retailer for warranty information.
Troubleshooting
Downlight doesn't turn on.
Check the power supply and ensure the LED GU10 lamp is correctly installed. Check the wiring connections at the terminal block.
Lamp flickers or is dim.
Ensure the lamp is compatible with the dimmer switch (if used). Try a different LED GU10 lamp.
Downlight is not flush with the ceiling.
Ensure the cutout size is correct (70mm). Make sure the spring clips are correctly positioned and holding the downlight in place.
Pros and Cons
Pros
- Fire-rated design ensures safety and compliance.
- IP65 rating allows for use in various environments, including bathrooms and kitchens.
- Can-less design improves lamp lifespan through better heat dissipation.
- Easy installation with screwless terminals.
- Sleek and modern design with an ultra-thin bezel.
Cons
- Requires separate purchase of LED GU10 lamps.
- Installation requires cutting a 70mm cutout.
- Limited to 10W LED GU10 lamps.
- May require professional installation depending on your experience.
Setup, Compatibility & Care
Setup
- Cutout: Using a hole saw, create a 70mm cutout in the ceiling.
- Wiring: Connect the mains wiring to the screwless push-fit terminals.
- Lamp Installation: Insert an LED GU10 lamp (up to 10W) into the fitting. Ensure the lamp is securely seated.
- Installation: Push the downlight into the cutout until the bezel is flush with the ceiling.
Compatibility
- Lamps: Compatible with LED GU10 lamps up to 10W.
- Dimming: Compatible with dimmable LED GU10 lamps (sold separately).
Care
- Cleaning: Use a soft, dry cloth to clean the downlight. Do not use abrasive cleaners.
- Lamp Replacement: Always switch off the power before replacing the LED GU10 lamp.