Motorex Chain Lube - Road - 500ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Motorex Chain Lube 622 is a premium, fully synthetic lubricant designed specifically for road motorcycle riders who demand high-performance chain maintenance. Its primary benefit is a specialized formula that resists fling-off while remaining 100% waterproof, providing exceptional durability for street and touring applications; however, it requires a clean chain surface to ensure proper adhesion, meaning it is not a "clean-and-lube" all-in-one solution.
All features
| Model Part Number | 7300415 |
|---|---|
| Brand | Motorex |
Extended Product Information
FAQs
Is this safe for my X-ring chain?
Yes, Motorex Chain Lube 622 is extensively tested and verified safe for use on all O-ring, X-ring, and Z-ring chains.
How often should I re-apply?
For best results, re-apply every 300 to 500 miles, or immediately after riding in heavy rain or washing the motorcycle.
Why is the spray white?
The white color is an intentional formulation choice that helps you see exactly where the lubricant has been applied to ensure total coverage.
Can I use this on off-road motorcycles?
While it can be used, this formula is specifically optimized for road riding. Motorex offers dedicated off-road specific lubricants that are better suited for dusty and sandy conditions.
Do I need to warm up the chain before applying?
Applying to a warm chain (after a short ride) can help the lubricant penetrate, but it is not strictly required. The most important factor is a clean, dry surface.
Troubleshooting
Lubricant is flinging onto the wheel after application
You likely applied too much product or did not allow enough time for the carrier to evaporate. Wipe off excess and wait at least 30 minutes before the next ride.
Lubricant does not seem to stick to the chain
Ensure the chain was completely clean and dry before application. Existing grease or water will prevent the synthetic formula from bonding correctly.
Pros and Cons
Pros
- Excellent resistance to fling-off
- Fully waterproof for all-weather protection
- Safe for use with all modern chain types (O, X, Z-rings)
- Easy to apply with included precision nozzle
Cons
- Requires a clean chain for optimal performance
- White color may be visible on darker chains
- Must be applied to a dry chain to ensure adhesion
Setup, Compatibility & Care
To ensure maximum chain life, always begin by cleaning your chain with a dedicated motorcycle chain cleaner to remove old, gritty lube and road grime. Ensure the chain is completely dry before applying Motorex 622. Shake the aerosol canister vigorously for at least one minute to ensure the synthetic additives are properly mixed. Hold the nozzle approximately 10-15cm away and apply a thin, even coat to the inside rollers of the chain as you rotate the rear wheel by hand. This product is fully compatible with all O-ring, X-ring, and Z-ring chains from major manufacturers. Store the aerosol in a cool, dry place away from direct sunlight and temperatures exceeding 50 degrees Celsius.