Pneumatic Air Dent Slide Hammer Puller - Neilsen - CT4794
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to remove dents from vehicles using a pneumatic air dent slide hammer puller. The Neilsen CT4794 offers a fast and effective way to remove dents without damaging the paint. Keep in mind that for very deep or sharp dents, professional bodywork might still be necessary.
All features
| Model Part Number | CT4794 |
|---|---|
| Brand | Neilsen |
Extended Product Information
FAQs
What air pressure should I use?
Use an air pressure between 6.3 to 10.3 bar (90 to 150psi).
What size dents can this tool handle?
The tool is effective for a wide range of dent sizes, but the size of the suction cups limits the size of the dent it can effectively remove.
How do I choose the right suction cup?
Select the suction cup that best matches the size and shape of the dent. The tool comes with 60mm, 120mm, and 150mm suction cups.
Can I use this on any type of car panel?
Yes, but it is most effective on steel panels. Aluminum panels may require a slightly different approach.
What should I do if the suction cup doesn't stick?
Clean the area around the dent thoroughly. Ensure the surface is free of wax, dirt, and other contaminants.
Is it safe to use on painted surfaces?
Yes, but always use caution. Clean the area around the dent and test the suction cup's grip before applying full force.
What if the dent is too deep?
For very deep or sharp dents, it is recommended to seek professional bodywork.
Troubleshooting
Suction cup won't adhere to the panel.
Ensure the panel surface is clean and free of dirt, wax, or debris. Make sure the suction cup is properly seated.
The slide hammer isn't pulling the dent.
Check if the air compressor is providing sufficient pressure. Make sure the suction cup is the correct size for the dent and that it is making a good seal.
Air leaking from the tool.
Inspect the fittings and hose for leaks. Tighten connections if necessary. Replace any damaged components.
Pros and Cons
Pros
- Efficient dent removal using a slide hammer mechanism.
- Comes with various suction cup sizes for different dent types.
- Air-powered for strong and consistent pulling power.
- Easy connection to standard air compressors.
- Durable construction ensures long-term use.
Cons
- May not be suitable for extremely deep or complex dents.
- Requires an air compressor for operation.
- User must have experience with dent removal to avoid damage.
Setup, Compatibility & Care
- Setup: Connect the tool to an air compressor with a 1/4 BSP fitting. Ensure the air pressure is within the range of 6.3 to 10.3 bar (90 to 150psi).
- Compatibility: Compatible with most standard air compressors.
- Operation: Select the correct size suction cup for the dent and attach it firmly. Operate the slide hammer to create a vacuum and pull the dent.
- Care: Regularly clean the tool and suction cups. Store in a dry place. Inspect the hose and fittings for wear and tear.
- Safety: Always wear safety glasses when using this tool.