CDA Gas Hob - Silver

This 4 burner gas hob features side positioned controls for safety and convenience. It boasts stur...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for users of the CDA HG6151SS gas hob, offering a safe and efficient cooking experience. The hob's key benefit is its ease of use with features like automatic ignition and removable pan supports. However, users should be aware of the need for proper ventilation during use. This guide covers setup, operation, maintenance, and troubleshooting to help you get the most out of your gas hob.

All features

ColourSilver
Model Part NumberHG6151SS
BrandCDA

Extended Product Information

FAQs

How do I light the burners?

Turn the control knob to the desired burner and press it down while turning to ignite the gas. The electronic ignition will spark to light the flame.

Are the pan supports dishwasher safe?

Yes, the enamel pan supports are dishwasher safe for easy cleaning.

What should I do if the flame goes out?

If the flame goes out, immediately turn off the gas supply and allow the hob to cool. Check for any drafts or obstructions, and then re-light the burner.

How do I clean the stainless steel surface?

Wipe the surface with a damp cloth and a mild detergent. Avoid abrasive cleaners that can scratch the surface.

What is the flame failure device?

The flame failure device is a safety feature that cuts off the gas supply if the flame is extinguished, preventing gas leaks.

What type of gas does this hob use?

The hob is designed to work with natural gas. Please check the product specifications for exact gas type.

How do I replace the burner caps?

Carefully remove the burner caps and replace them with new ones ensuring they are properly aligned.

Troubleshooting

Burner won't ignite.

Check the gas supply and ensure the burner cap is correctly positioned. Clean the burner if necessary and check the electronic ignition.

Flame is too high or low.

Adjust the gas supply valve. If the issue persists, consult a qualified gas engineer.

Hob is not level.

Adjust the hob's feet until it is level with the countertop.

Pan supports are unstable.

Ensure pan supports are correctly placed and balanced on the hob.

Flame goes out during use.

Check the flame failure device and ensure it's functioning correctly. Check for drafts in the kitchen.

Pros and Cons

Pros

  • Easy to clean with removable pan supports.
  • Enhanced safety with side controls and a flame failure device.
  • Efficient cooking with four burners.
  • Automatic ignition for ease of use.
  • Durable and stylish stainless steel finish.
  • Dishwasher-safe pan supports.

Cons

  • Requires professional installation for gas connection.
  • May require specific cleaning products for stainless steel.
  • The 60cm width may not suit all kitchen setups.
  • Gas hobs require adequate ventilation during use.
  • Users need to be careful of hot surfaces after use.

Setup, Compatibility & Care

  1. Installation: The gas hob must be installed by a qualified professional to ensure safety and compliance with local regulations. Make sure the hob is securely fitted into the cutout in your countertop, according to the dimensions in the product specifications.
  2. Gas Connection: Ensure the gas supply is compatible with the hob's specifications. Check the gas type and pressure requirements before connecting.
  3. Electrical Connection: The hob requires a 230-240V, 50 Hz power supply. Ensure the electrical outlet is correctly earthed.
  4. Cleaning: Allow the hob to cool completely before cleaning. Remove the pan supports and clean them with warm, soapy water or in a dishwasher. Wipe the stainless steel surface with a damp cloth and a mild detergent. Avoid abrasive cleaners that could damage the surface.
  5. Care: Regularly check the burner nozzles for any blockages and clean them if necessary. Ensure the flame failure device is functioning correctly by checking if the gas supply cuts off when the flame is extinguished. Check the installation compartment dimensions to ensure compatibility with your countertop.