Trakker Tempest RS Cool Guys - 203205-CP
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Trakker Tempest RS Cool Guys are an essential accessory for anglers using the Tempest RS range of shelters who need to maintain a comfortable internal environment during the peak of summer. By allowing users to extend the rear vents to create additional shade, these ropes significantly improve ventilation and lower the internal temperature of the shelter, though they do require extra space around the pegging points to be fully deployed.
All features
| Model Part Number | 203205-CP |
|---|---|
| Brand | Trakker |
Extended Product Information
FAQs
Can I use these on my older Tempest V2?
No, the Cool Guys are specifically designed for the attachment points on the Tempest RS range.
How many ropes are included?
The set contains eight guy ropes, enough to fully tension the four rear vents.
Does the set include pegs?
Yes, the kit is supplied with eight heavy-duty t-pegs.
Can these be left on the shelter when packing away?
While the clips are quick to remove, it is recommended to detach them before packing your shelter to prevent the carabiners from damaging the main fabric during transit.
Do these help with condensation?
Yes, by increasing airflow through the rear vents, they significantly help in reducing internal condensation.
Troubleshooting
Vent cover flapping in high wind
Ensure all four lines are pulled taut and the ground is firm enough to hold the t-peg. If the wind is excessive, you may need to lower the vent covers for safety.
Carabiner clips sticking
Clean the spring gate with a light brush or rinse with fresh water to remove grit and silt.
Pros and Cons
Pros
- Significantly improves ventilation in hot conditions
- Easy to attach and adjust during setup
- Durable t-pegs included for secure anchoring
- Compact and lightweight for transport
- High-quality materials matching the Tempest ecosystem
Cons
- Requires extra footprint space around the back of the shelter
- Not compatible with older non-RS Tempest models
- Requires manual adjustment for each vent
Setup, Compatibility & Care
Compatibility: This kit is specifically engineered for the Trakker Tempest RS Brolly, Tempest RS 100, and Tempest RS 150 models. It is not designed for non-RS shelters.
Setup Instructions:
- Identify the four vent attachment points on the rear of your shelter.
- Clip the carabiner end of the guy rope onto the designated loop.
- Pull the rope away from the shelter at a 45-degree angle to lift the vent cover.
- Secure the end of the rope using the provided t-pegs.
- Adjust the rope tensioner to remove slack from the fabric.
Care: Always dry the guy ropes and pegs before storing them in the Aquatexx bag to prevent mildew. Wipe the carabiner clips clean after use in muddy conditions to ensure the springs remain functional.