HexGuard Polymer Grab Adhesive Glue - Black - 290ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The HexGuard Polymer Grab Adhesive is designed for DIY enthusiasts and professionals seeking a reliable, high-strength bonding solution for 3D wall panels. It offers an exceptionally durable, moisture-resistant bond across a wide range of both mineral and organic surfaces, making it a versatile choice for interior design projects. While it provides excellent adhesion, users should note that as a water-based, solvent-free formula, it requires proper curing time through moisture evaporation, which may be slower in highly humid environments compared to fast-acting solvent-based glues.
All features
| Colour | Black |
|---|---|
| Model Part Number | 45110002 |
| Brand | HexGuard |
Extended Product Information
FAQs
Is this adhesive suitable for outdoor use?
No, this product is designed for interior use on internal walls and is not rated for constant exposure to outdoor weather conditions.
Can I use this on tiles?
While it works on many mineral surfaces, test a small area first to ensure the bond strength meets your specific tile's requirements.
How long does it take to cure fully?
Full curing depends on the ambient temperature and humidity, but it typically forms a strong bond within 24-48 hours.
Does it contain harmful solvents?
No, the HexGuard adhesive is solvent-free, making it safer for indoor applications.
What tools do I need for application?
You will need a standard caulking gun, a utility knife to cut the nozzle, and a cloth for cleaning any drips or excess glue.
Can I paint over the adhesive once dried?
Yes, once the adhesive has fully cured, you can typically paint over edges, provided the adhesive is not exposed directly.
Troubleshooting
Adhesive is not sticking to the substrate
Ensure the surface is completely free of dust, oil, or loose paint. Use a damp cloth to clean the area and let it dry thoroughly before reapplying.
Excessive curing time
If the humidity is high, the adhesive will cure slower. Increase ventilation in the room or use a dehumidifier to speed up the evaporation process.
Difficulty dispensing from the tube
Check if the nozzle is clogged or if the caulking gun mechanism is worn. Ensure the nozzle tip is cut at an appropriate angle for the desired bead thickness.
Pros and Cons
Pros
- Safe solvent-free composition
- Excellent adhesion on both mineral and wood-based substrates
- Moisture-resistant properties ensure durability
- Easy to apply with standard tools
Cons
- Curing time depends on ambient humidity
- Not suitable for outdoor surfaces exposed to constant water
- Requires clean, dust-free surfaces for optimal bonding
Setup, Compatibility & Care
To ensure maximum strength, the surfaces must be dry, clean, and free of dust, grease, or loose debris before application. Load the 290ml cartridge into a standard caulking gun, cut the nozzle to the desired bead size, and apply the adhesive to the back of your panel. Press the panel against the target surface, adjusting it quickly into position before the bond sets. Wipe away any excess adhesive immediately with a damp cloth, as it is difficult to remove once hardened. Store the product in a cool, dry place to prevent premature drying within the cartridge.