Astro Pneumatic Tool Co. Pistol Grip Punch-Flange Tool - 8MM - AO608PT
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Astro Pneumatic ONYX Pistol Grip Punch-Flange Tool is designed for professional metal fabricators and automotive restorers who require efficient panel preparation. It excels at creating clean, precise holes and perfect flange crimps for seamless panel alignment, though it requires a stable high-pressure air source to perform at its peak. This tool combines a rotating head design with a lightweight, ergonomic chassis to reduce fatigue during repetitive metal fabrication tasks.
All features
| Model Part Number | AO608PT |
|---|---|
| Brand | Astro Pneumatic Tool Co |
Extended Product Information
FAQs
What is the maximum thickness of metal this tool can handle?
The tool is rated for a maximum capacity of 1.6mm for both punching and crimping.
Can I change the punch size?
No, this specific model (AO608PT) comes with a fixed 8mm punch diameter.
How much air consumption does this tool require?
The tool has an average air consumption rate of 4 cfm.
Is this tool suitable for stainless steel?
It is designed for standard sheet metal; using it on hardened materials like stainless steel may dull the punch prematurely.
How do I lubricate the tool?
Add a few drops of high-quality pneumatic tool oil into the air inlet before each session.
Troubleshooting
Tool fails to punch or crimp completely
Check your air compressor output; ensure pressure is strictly between 90-120 psi and the hose is free of kinks.
Sluggish lever movement
Add air tool oil to the air inlet and operate the trigger several times to lubricate the internal piston.
Material deforming or jamming
Verify that the material thickness does not exceed the 1.6mm limit and ensure the tool head is fully seated against the metal edge.
Pros and Cons
Pros
- Reduces fabrication time by half
- Provides perfectly offset edges for no-bump welds
- Highly ergonomic for long-term use
- Rotating head enhances versatility in tight spots
Cons
- Requires a steady air supply of 90-120 psi
- Limited to 1.6mm material thickness
- Fixed 8mm punch diameter may not suit every project
Setup, Compatibility & Care
To ensure optimal performance, connect the tool to an air compressor capable of delivering between 90 and 120 psi. The tool features a standard 1/4-inch NPT air inlet, making it compatible with most universal pneumatic couplers.
Setup Steps:
- Ensure your air line is equipped with an inline oiler or manually add 2-3 drops of air tool oil into the inlet before each use.
- Adjust the rotating head to the desired angle to align with the panel edge.
- Verify the air pressure is regulated correctly before engaging the lever.
Maintenance:
- Clean metal shavings from the head assembly after every use to prevent jamming.
- Store in a dry, dust-free environment to avoid internal corrosion.
- Periodically inspect the punch pin for signs of wear or dulling.